JVC CA-MXS6MDR Service Manual page 16

CA-MXS6MDR
SP-MXS6MD
Removing the cartridge holder assembly
1. Remove the two screws I on the upper side of the
loading assembly.
Removing the slide bar and the eject bar
Prior to performing the following procedure, remove
the cartridge holder assembly.
1. Remove the slide bar upward.
2. Move the eject bar outward until it stops as shown in
Fig.14. Push the convex part g on the bottom of the
body and remove the eject bar from the chassis.
1-16
(See Fig.14 and 15)
I
I
Eject bar
(See Fig.14 and 15)
Slide bar
Fig.14
I
k
Eject bar
Fig.15
Cartridge holder assembly
Eject bar
Part g
Slide bar
UD base
Cartridge holder assembly