Connections; Accessory Jacks And Controls - Yamaha Electone STAGEA ELC-02 Owner's Manual

13

Connections

On the backside and front left side of this Electone is a separate panel equipped with various input/output
terminals and miscellaneous controls, including a terminal for connecting a Foot Pedal (sold separately).
Accessory Jacks and
Controls
This section provides brief explanations for each jack/
control on the Electone. For details on connecting to
external devices, see page 183.
2 3 4
1 DC IN jack
For connecting the AC adaptor.
2 PHONES jack
For connection of a stereo headphone set. When
headphones are connected to this jack, sound to the
Electone's speaker system is automatically cut off,
allowing you to play without disturbing others.
Reference page
• Using headphones (page 183)
3 MIC jack
For connecting a mono input, such as a microphone. This
Electone outputs the microphone signal, with reverb
processing, through the OUTPUT jacks or AUX OUT
jacks.
Reference page
• Connecting a microphone (page 185)
4 MIC VOLUME knob
For adjusting the level of input signal from the MIC jack.
1
5 USB TO DEVICE terminal
For connecting USB storage devices such as USB flash
drive.
5
ELC-02/ELCU-M02 Owner's Manual
13
181