Table of Contents
Advertisement
MAC filter, WiFi access control, or ACL is enabled, the WiFi device connects to the extender
but cannot get an IP address from the extender and cannot access the Internet. To allow the
WiFi device to receive an IP address from the extender and access the Internet, you must
provide the translated MAC address to the router.
To add a translated MAC address to your router:
1.
Log in to your router and disable the MAC filter, WiFi access control, or ACL.
For information about how to disable your router's MAC filter, WiFi access control, or
ACL, see your router's documentation.
2.
Power on the extender and connect all of your WiFi devices to the extender.
3.
Make sure that the Link Rate LED remains lit.
4.
Log in to your extender:
a. Launch a web browser.
b. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
c. Enter your email address and password and click the LOG IN button.
The Status page displays.
5.
If your browser displays the Menu icon
The extender menu displays.
6.
Select Settings > Connected Devices.
The Connected Devices section displays the MAC addresses and virtual MAC addresses
for computers and WiFi devices that are connected to the extender network.
7.
On the router, add the extender's virtual MAC address and all the virtual MAC addresses
connected to the extender network to your router's MAC filter table.
8.
Enable the router's MAC filter, WiFi access control, or ACL.
AC1200 WiFi Range Extender
, click it.
Network Settings
38
Advertisement
Table of Contents
