Table of Contents
Advertisement
3 Prepare
Always follow the instructions in this chapter
in sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power and turn on
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the bottom of the speaker.
•
Risk of electric shock! When you unplug the AC power
adapter, always pull the plug from the socket. Never
pull the cord.
•
Before you connect the AC power adapter, make sure
that you have completed all the other connections.
•
Connect the power adapter to
the DC IN socket on the back of the
•
speaker.
•
the wall power socket.
» The volume indicator lights up.
» The signal strength indicators flash
for several seconds until the speaker
boots up.
6
EN
» For first-time use or in single mode,
the
indicator starts flashing and the
speaker enters pairing mode.
» When the speaker acts as the master
in group mode, the
flashing until the speaker finds the last
paired Bluetooth-enabled device.
» When the speaker acts as a slave in
group mode, the GROUP indicator
starts flashing until the speaker finds its
master in the group.
Tip
•
Single mode indicates to use a speaker as a single
Bluetooth speaker that does not acts as a master or
slave in a group of speakers.
•
Group mode indicates that several izzylink-copatible
multiroom speakers form a group, with one speaker
acting as the master and the others as slaves.
Switch to standby mode
•
In single mode, press .
» The volume indicator dims.
» All the other indicators turn off.
•
In group mode, press
the group.
» The volume indicator on each speaker
in the group dims.
» All the other indicators turn off.
•
In single mode, to switch on from standby
mode, press
again.
•
In group mode, press
in the group to switch all the speakers on
from standby mode.
Note
•
You can hold
to turn off the volume indicator
completely.
•
In single mode, if the Bluetooth connection is invalid or
music playback is stopped for 15 minutes, the speaker
switches to standby mode automatically.
•
In group mode, if the Bluetooth connection with the
master speaker is invalid or music playback is stopped
for 15 minutes, all the speakers in the group switch to
standby mode automatically.
indicator starts
on any speaker in
on any speaker
Advertisement
Table of Contents
