Appendix B Frus - HP 5130-24G-4SFP+ EI Installation Manual

Appendix B FRUs

The HP 5130-24G-SFP-4SFP+ EI/HP 5130-24G-SFP-4SFP+ EI TAA switch provides two power supply slots.
One power supply can meet the power requirement of the switch. You can install two power supplies on
the switch for redundancy.
5130-24G-SFP-4SFP+ EI/HP 5130-24G-SFP-4SFP+ EI TAA switch.
Table 10 Power modules available for the HP 5130-24G-SFP-4SFP+ EI/HP 5130-24G-SFP-4SFP+ EI
TAA switch
Power module model
•
PSR150-A1
•
PSR150-A
PSR150-D1
When two power supplies are installed, you can hot-swap a power supply. To avoid device damage and
bodily injury, follow the procedures in
Table 10 describes the power supplies available for the HP
Item
Rated input voltage
Max input voltage
Max output power
Rated input voltage
Max input voltage
Max output power
Figure 17 and
44
Specification
100 VAC to 240 VAC @
50 Hz or 60 Hz
90 VAC to 264 VAC @ 47
Hz to 63 Hz
150 W
–48 VDC to –60 VDC
–36 VDC to –72 VDC
150 W
Figure 18 to install and remove the power supply.
Remarks
For more information
about the power supplies,
see HP PSR150-A &
PSR150-D Power Supplies
User Guide.