Before You Start; Checking What's In The Box; Installing The Receiver; Flow Of Settings On The Receiver - Pioneer VSX-530-K Operating Instructions Manual

Before you start

Checking what's in the box

Please check that you've received the following supplied
accessories:
• Remote control
• AAA size IEC R03 dry cell batteries (to confirm system
operation) x2
• AM loop antenna
• FM wire antenna
• Warranty card
• Quick start guide
• Safety Brochure
• SPEAKER CAUTION Sheet (English only)
• These operating instructions (CD-ROM)

Installing the receiver

• When installing this unit, make sure to put it on a level and
stable surface.
Don't install it on the following places:
- on a color TV (the screen may distort)
- near a cassette deck (or close to a device that gives off a
magnetic field). This may interfere with the sound.
- in direct sunlight
- in damp or wet areas
- in extremely hot or cold areas
- in places where there is vibration or other movement
- in places that are very dusty
- in places that have hot fumes or oils (such as a kitchen)

Flow of settings on the receiver

The unit is a full-fledged AV receiver equipped with an
abundance of functions and terminals. It can be used easily
after following the procedure below to make the connections
and settings.
The colors of the steps indicate the following:
Required setting item
Setting to be made as necessary
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1
Connecting the speakers
Where you place the speakers will have a big effect on
the sound.
• Placing the speakers (page 11)
• Connecting the speakers (page

2
Connecting the components
For surround sound, you'll want to hook up using a
digital connection from the Blu-ray Disc/DVD player to
the receiver.
• About video outputs connection
• Connecting a TV and playback components
(page 15)
• Connecting antennas (page 17)
• Plugging in the receiver (page 18)

3 Power On
Make sure you've set the video input on your TV to this
receiver. Check the manual that came with the TV if you
don't know how to do this.

4
Specify the size and number of speakers you've
connected
• Speaker Setting (page 29)

6
5
The Input Assign menu
(When using connections other than the recommended
connections.)
The HDMI Setup menu
(When the connected TV supports the HDMI Audio
Return Channel function.)
6 Basic playback
• Selecting the audio input signal
• Playing a USB device
• Choosing the listening mode
7 Adjusting the sound as desired
12)
• Using the Sound Retriever
• Better sound using Phase Control
• Setting the Audio options
• Manual speaker setup
(page 14)
(page 31)
(page 32)

(page 19)
(page 19)
(page 21)
(page 25)

(page 26)
(page 26)
(page 27)
(page 29)