Using The Synchronisation Software Qsync; Getting Started; Requirements For The Use Of Qsync; Create A User Account On The Nas - Fujitsu CELVIN NAS QE705 Operating Manual

Using the synchronisation software
Qsync

Getting started

Qsync is a cloud-based file synchronisation service enabled by CELVIN NAS. If you add files to your
local Qsync folder, these files are available on your CELVIN NAS and all devices connected with it.

Requirements for the use of Qsync

► Ensure that the network serviceQsync is activated on your NAS.
► Create NAS user accounts.
► Install the Qsyncutility on your computer.
► InstallCELVIN NAS Explorer on your mobile device.
► Log on on the NAS from your computer or mobile device (Qsync Clients).

Create a user account on the NAS

► To create a user account for Qsync users, proceed as follows:
As a NAS administrator:
► Create a user account in the administration area of the NAS under Control Panel - Privileges -
User - Create user account.
Every NAS user account is automatically aQsync user account.
i
As a NAS user:
► Contact your system administrator so that they can create an account for you.

Install Qsync utility

The Qsync utility synchronises all selected data on your computers and mobile devices.
Installation on computers:
► Install the Qsync utility with the product CD.
Or
► Download the Qsync utility from the Fujitsu website at http://www.fujitsu.com/fts/download
Fujitsu

Using the synchronisation software Qsync

35