Page 1
4. Press [4] to enter the PCEFTPOS menu To POWER OFF, power from the POS will need to be cut-off. The terminal can’t be shut down locally as it is powered via USB. This will need to be done by...
The first LED, when continuously turned on (i.e. not flashing), indicates that contactless processing is enabled for the transaction. The rest of the LEDS are only turned on whilst the contactless transaction is being processed. CBA3002 090120 IPP350 Quick Merchant Operator Guide 2 of 7...
Page 3
2. If tipping enabled, enter tip and press [OK] or to bypass just press [OK] 6. Wait for processing to be completed 3. Press [Func] on the keypad 7. Transaction is approved 8. Remove card when prompted CBA3002 090120 IPP350 Quick Merchant Operator Guide 3 of 7...
Page 4
3. Settlement report is printed 3. Swipe, insert or tap the card Note: The terminal can also typically be set via the POS Note: Remainder of refund transaction flow is the same to automatically settle every day at a particular time.
Page 5
When a transaction that exceeds your floor limit is performed in the SAF mode, an authorisation number will need to be obtained by calling the authorisation centre. CBA3002 090120 IPP350 Quick Merchant Operator Guide 5 of 7...
Page 6
User enables training mode on the POS and initiates a purchase transaction Note: Only financial transactions can be performed whilst in training mode. Training mode can also only be enabled when the terminal is in a ready state and when there are no reversal or advices pending.
Page 7
For authorisations on all over floor limit manual credit card transactions, please call 13 26 36. For stationery orders please visit https://eftposstationery.evolveshop.com.au or call 1800 230 177. For more information on this terminal and other CommBank merchant services, please visit commbank.com.au/business/merchant-services CBA3002 090120 IPP350 Quick Merchant Operator Guide 7 of 7...