Table of Contents
Advertisement
1. Prepare your modem.
Unplug your modem's power. If it has a
battery backup, remove the battery.
2. Connect your modem.
Plug in your modem. Put the battery
back in. Then cable the modem to the
router Internet port.
DSL or Cable
Internet
Modem
3. Power on the router.
Wait for the WiFi LED to light.
Router
4. Connect a computer.
You can use an Ethernet cable or
.
connect wirelessly
5. Launch a browser.
NETGEAR genie displays.
If you do not see genie, type
www.routerlogin.net. Type
admin for the user name and
password as the password.
Support
Thank you for purchasing this NETGEAR product.
After installing your device, locate the serial number on the label
of your product and use it to register your product at
https://my.netgear.com.
You must register your product before you can use NETGEAR
telephone support. NETGEAR recommends registering your
product through the NETGEAR website.
For product updates and web support, visit
http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR
support resources.
You can get the user manual online at
http://downloadcenter.netgear.com
or through a link in the
product's user interface.
Advertisement
Table of Contents
