Table of Contents
Related Manuals for Sony VPL-VW5000
Summary of Contents for Sony VPL-VW5000
- Page 1 4-584-922-01 (2) Video Projector Operating Instructions Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference. VPL-VW5000 © 2016 Sony Corporation...
-
Page 2: Table Of Contents
Table of Contents Location of Controls Using Network Features Front/Right Side ............3 Displaying the Control Window of the Unit with a Web Browser ..............34 Rear/Bottom ..............4 Operating the Control Window ......... 35 Remote Control ............5 Switching the Page ..........35 Setting the Access Limitation ...... -
Page 3: Location Of Controls
Location of Controls Front/Right Side The buttons on the control panel function the same as those on the remote control. Control panel Connectors g IR IN/IR OUT connector Control panel IR IN: Inputs the signals to control the projector. When connecting to the IR IN connector, the remote a LENS button (page 6) control detector does not work with the remote b M/m/</, (arrow)/ENTER button (page 17) -
Page 4: Rear/Bottom
m REMOTE connector Rear/Bottom Connects to a computer, etc. for remote control. Indicators and remote control detector n ON/STANDBY indicator (page 38) o WARNING indicator (page 38) p Remote control detector (page 6) Others q Lens r Ventilation holes (intake) Note If you look through the projection lens while the unit is projecting, the light may damage your eyes. -
Page 5: Remote Control
a LIGHT button Remote Control Illuminates the buttons on the remote control. b Infrared transmitter c ?/1 (On/Standby) button (page 7) d INPUT button (page 12) e CALIBRATED PRESET buttons (page 16) f LENS ADJUSTMENT buttons (page 7) g POSITION button (page 13) h RESET button (page 18) i M/m/</, (arrow)/ (enter) buttons... -
Page 6: Connections And Preparations
Connections and Preparations This section describes how to install the unit and screen, how to connect the equipment from which you want to project the picture, etc. Installing the Unit Adjusting the Picture Position The installation distance between the unit and a screen varies depending on the size of the screen or whether or not Project an image on the screen and then adjust the picture you use the lens shift features. - Page 7 Note Note Depending on the installation location of the unit, you may not be Adjust the lens by using buttons on the remote control or the control able to control it with the remote control. In this case, point the panel of the unit.
- Page 8 Note Note When adjusting the picture position, do not touch the lens unit, The range to move the picture projected on the screen can be otherwise your fingers may be pinched by the moving parts. adjusted only within the octagon area illustrated below. For details, see “Projection Distance and Lens Shift Range”...
- Page 9 Lens adjustment window (test pattern) 1.78:1 (16:9) 1.33:1 (4:3) 2.35:1 1.85:1 The dashed lines show the screen sizes of each aspect ratio.
-
Page 10: Connecting To Video Equipment Or A Computer
: Video signal flow Use a high speed HDMI cable on which the cable type logo is specified. (Sony products are recommended.) Notes • Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D video and 4K video may not be displayed properly. -
Page 11: Connecting To A Computer
: Video signal flow Use a high-speed HDMI cable on which the cable type logo is specified. (Sony products are recommended.) Notes • Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D video and 4K video may not be displayed properly. -
Page 12: Projecting
Projecting This section describes how to operate the unit to view a picture from the equipment connected to the unit. It also describes how to switch the screen size according to the picture. Projecting the Picture Watching 3D Video Images Turn on both the unit and the equipment connected to the unit. -
Page 13: Using The Picture Position
Put on the 3D glasses. Using the Picture Precautions for use Position Misoperation may occur if: • The viewing position is too far from the projector • There are other communication devices, such as a wireless LAN (IEEE802.11 b/g/n) or a microwave with You can store up to five combinations of lens settings a bandwidth of 2.4 GHz, near the unit (focus, picture size, picture position), aspect ratio, and... -
Page 14: Selecting The Aspect Ratio According To The Video Signal
Notes Selecting the Aspect • After you have selected and confirmed the lens position, the lens starts to move. Do not touch, or place anything near, the lens, Ratio According to the otherwise it may cause injury or a malfunction. •... - Page 15 Notes on switching the “Aspect” setting Original image (for 16:9 Recommended setting and display) resultant images • Select the aspect mode taking into account that changing the aspect ratio of the original picture will provide a Normal different look from that of the original image. •...
-
Page 16: Selecting The Picture Viewing Mode
Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of video source or room conditions. You can save and use different preset modes for 2D/3D respectively. Press one of the CALIBRATED PRESET buttons. CALIBRATED PRESET buttons Setting items Description... -
Page 17: Using The Menus
Using the Menus This section describes how to make various adjustments and settings using the menus. Note The menu displays used for the explanation may be different from the actual menu display. Press M/m to select an item you want to set or adjust Operation through the and press , or Menus... - Page 18 Next menu window Setting items Make the setting or adjustment of an item. When changing the adjustment level To increase the value, press M/,. To decrease the value, press m/<. Press to store the setting and restore the original menu screen. When changing the setting Press M/m to change the setting.
-
Page 19: Picture Menu
Database: Select “Normal” or “Mastered in 4K.” “Mastered in 4K” provides image quality suitable for Blu-ray Disc™ “Mastered in 4K” releasing from Sony Pictures Home Entertainment. Resolution: When you increase the setting value, the texture and detail of the picture become sharper. - Page 20 Setting items Description Cinema Black Pro Laser Light Setting Dynamic Control: Adjusts the range of movement of the laser light control. Full: Automatically optimizes the laser light control and signal processing according to the brightness level of the input source. This results in a bright and high contrast image. Limited: Suppresses the movement and brightness of the laser light control, making the picture quality suitable for viewing in a dark room.
- Page 21 Setting items Description Expert Setting NR (Noise Reduction) Reduces the roughness or noise of the picture. Auto: Detects the noise level to reduce the roughness or noise of the picture automatically. High/Middle/Low: Select a setting according to the roughness or noise of the input signal source. Off: The NR (noise reduction) function is not applied.
- Page 22 Setting items Description x.v.Color Set this item when connecting the unit with equipment that supports x.v.Color and playing back an x.v.Color video signal. On: You can play back an x.v.Color video signal. Off: The “x.v.Color” function is not applied. For details on x.v.Color, see “About x.v.Color” (page 40). Setting x.v.Color to “On”...
-
Page 23: Advanced Picture Menu
Advanced Picture Menu You can adjust the gaps in color that have occurred after a long period of use. Setting items Description Auto Calibration Pre Check: Checks the color difference against the factory default settings, before calibration starts. Adjust: Performs Auto Calibration. Before/After: Toggles the factory default settings and the setting after the calibration at a certain frequency. -
Page 24: Screen Menu
Screen Menu You can set the picture size, aspect mode, etc. Note These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustment/Setting Items” (page 43). Item names in brackets represent those printed on the remote control. Setting items Description Picture Position... - Page 25 Setting items Description Aspect You can set the aspect ratio of the picture to be displayed for the current input signal (page 14). [ASPECT] 1.85:1 Zoom: A 1.85:1 aspect ratio picture is displayed in its original aspect ratio, enlarged so that black bands do not appear at the top and bottom of the projection surface.
-
Page 26: Setup Menu
Notes • When “All Off” is selected, warning message for high temperature is not displayed. • Note that Sony is not liable for failure of the unit or any accident caused by selecting “All Off.” Language Selects the language used in the menu and on-screen displays. - Page 27 Setting items Description Power Saving Sets the Power Saving mode. Standby: If no signal is input for 10 minutes, power is turned off automatically and the projector goes into standby mode. Off: Disables the Power Saving function. All Reset All settings are initialized to their factory preset values.
-
Page 28: Function Menu
Function Menu The Function menu is used for changing the settings of the various functions of the unit. Setting items Description 3D Settings You can change the settings of the 3D function. 2D-3D Display Sel. For Switching the video images to “2D” or “3D.” Auto: Displays 3D video images when HDMI signals with 3D information* are input. - Page 29 Setting items Description HDMI Signal Format Switches the video signal formats for 4K. Standard Format: Select this format if the projector cannot display the 4K video properly. Enhanced Format: This format is the factory default setting. Video has a higher definition when compared with Standard Format.
-
Page 30: Items Locked By Settings Lock
Items Locked by Settings Lock Group 1 Group 2 Picture menu Setup menu Reset Status Reality Creation Language Laser Light Setting Menu Position Contrast Enhancer High Altitude Mode Motionflow Remote Start Contrast Network Management Brightness Power Saving Color Function menu Color Temp. -
Page 31: Installation Menu
Installation Menu The Installation menu is used for changing the installation settings. Setting items Description Image Flip Flips the picture on the screen horizontally and/or vertically. HV: Flips the picture horizontally and vertically. H: Flips the picture horizontally. V: Flips the picture vertically. Off: The picture does not flip. - Page 32 Setting items Description Panel Alignment This feature allows you to adjust the gaps in the color of characters or the picture on the projection surface. On: Adjusts the gaps in the colors selecting “Adjust Item” or “Adjust Color.” Adjust Item: Selects how to make adjustments from below. Shift: Shifts the whole picture and makes adjustments.
-
Page 33: Information Menu
Information Menu The Information menu displays the model name, serial number, input signal type, and software version. Model name Serial No. Signal type Software version Items Description Model Name Displays the model name Serial No. Displays the serial number. Signal type Displays the preset memory number and resolution of the video which you are watching. -
Page 34: Using Network Features
Using Network Features Connection to the network allows you to operate the http://xxx.xxx.xxx.xxx following features: (xxx.xxx.xxx.xxx: IP address for the unit) • Checking the current status of the unit via a Web When connecting by the IPv6 address browser. • Making the network settings for the unit. http://[xxxx:xxxx:- xxxx] •... -
Page 35: Operating The Control Window
The default password “Projector” cannot be set as a new Operating the Control password. Window Note If you forget your password, consult with qualified Sony personnel. Switching the Page Confirming the Information Regarding the Unit Click one of the Page Switching buttons to display the desired setting page. -
Page 36: Error Handling
Error Handling Troubleshooting If the unit appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom Cause and Remedy Page The power is not turned on. - Page 37 Remote control Symptom Cause and Remedy Page The remote control does not work. Batteries could be weak. Replace them with new batteries. – Insert the batteries with the correct polarities. – If there is a light source near the remote control detector, the unit may work improperly or –...
-
Page 38: About Indicators
Sony personnel. Six times The unit detects a drop impact. If there is abnormality on the unit, consult with qualified Sony personnel. If there are no abnormalities on the unit, disconnect the AC power cord and check (Flashes in red) that the ON/STANDBY indicator turns off, then connect the AC power cord and turn the unit on. -
Page 39: Message Lists
Message Lists Warning messages Symptom Cause and Remedy Page High temp.! Light off in 1 min. Turn off the power. – Check to ensure that nothing is blocking the ventilation holes. Frequency is out of range! Frequency is out of range. Input a signal that is within the acceptable frequency range of the unit. -
Page 40: Others
• xvYCC is an international standard of the technical into a PC connected to the internet. specifications of the extended-gamut color space for Download the update files from the following Sony video signals. The color gamut of xvYCC is wider than website: the one of sRGB that is used with the current television http://www.pro.sony.eu/... -
Page 41: Specifications
• The values for mass and dimensions are approximate. • Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. • Information on accessories in this manual is current as of February 2016. -
Page 42: Preset Signals
Preset Signals The following table shows the signals and video formats which you can project using this unit. When a signal other than the preset signals shown below is input, the picture may not be displayed properly. Preset memory Preset signal (resolution) fH (kHz) fV (Hz) Sync... -
Page 43: Input Signals And Adjustment/Setting Items
Input Signals and Adjustment/Setting Items The items in the menus available to adjust differ depending on the input signal. The following tables indicate them. The items that cannot be adjusted/set are not displayed in the menu. Screen menu Preset memory number Item 5 to 8, 10 to 14, 18 to 20, 71, 72, 93, 96 26, 32, 37, 45, 47, 55... -
Page 44: Aspect Mode
Aspect Mode Selectable items vary depending on the type of input signal or 3D format. For details, see the tables below. Items that cannot be selected are not displayed in the menu. Acceptable signals 720 × 480 4096 × 2160 3840 ×... - Page 45 Picture menu Item Storage conditions Calib. Preset For each input connector and preset signal Reset For each input connector and Calib. Preset Reality Creation Laser Light Setting Contrast Enhancer Motionflow Contrast Brightness Color Color Temp. D93 - D55, Custom Gain R For each Color Temp.
-
Page 46: Projection Distance And Lens Shift Range
Projection Distance and Lens Shift Range The projection distance refers to the distance between the front of the lens and the projected surface. Projection distance L Front of the lens Projected image The lens shift range represents the distance in percent (%) by which the lens can be shifted from the center of the projected image. - Page 47 When projecting in 1.90:1 (Native Full Display 17:9) format 1.90 Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height VPLL-Z7008 VPLL-Z7013 80" (2.03 m) 1.80 × 0.95 1.43 – 1.82 2.23 – 4.90 (71 × 37) (56 –...
- Page 48 When projecting in 1.78:1 (16:9) format 1.78 Video display area Projection area Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height VPLL-Z7008 VPLL-Z7013 80" (2.03 m) 1.77 × 1.00 1.50 – 1.91 2.35 – 5.15 (70 ×...
- Page 49 When projecting in 2.35:1 format 2.35 Video display area Projection area Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height VPLL-Z7008 VPLL-Z7013 80" (2.03 m) 1.87 × 0.80 1.49 – 1.89 2.33 – 5.10 (74 ×...
-
Page 50: Dimensions
Dimensions Front Unit: mm (inches) Unit: mm (inches) 750 (29 L’: The distance between the front of the lens (center) and 65 (2 the front of the cabinet VPLL-Z7008: 159.0 mm (6 inches) (Tele) to 185.2 mm inches) (Wide) VPLL-Z7013: 130.2 mm (5 inches) Bottom Unit: mm (inches) -
Page 51: Notices And Licences For Software Used In This Product
0. This License applies to any program or other work http://oss.sony.net/Products/Linux/ the Program, the distribution of the whole must be on which contains a notice placed by the copyright... - Page 52 executable work, complete source code means all the system; it is up to the author/donor to decide if he or OR OTHER PARTY HAS BEEN ADVISED OF source code for all modules it contains, plus any she is willing to distribute software through any THE POSSIBILITY OF SUCH DAMAGES.
- Page 53 Boston, MA 02110-1301, USA. Everyone is derivative of the original library. The ordinary using the Library is not restricted, and output from permitted to copy and distribute verbatim copies of General Public License therefore permits such such a program is covered only if its contents this license document, but changing it is not allowed.
- Page 54 newer version than version 2 of the ordinary GNU to the copy of this License. Also, you must do one of License will not have their licenses terminated so General Public License has appeared, then you can these things: long as such parties remain in full compliance. specify that version instead if you wish.) Do not a) Accompany the work with the complete 9.
- Page 55 you have the option of following the terms and This library is free software; you can redistribute it This product includes software developed by the conditions either of that version or of any later and/or modify it under the terms of the GNU Lesser University of California, Berkeley and its version published by the Free Software Foundation.
- Page 56 HOWEVER CAUSED AND ON ANY THEORY ANY WAY OUT OF THE USE OF THIS LIABILITY, WHETHER IN AN ACTION OF OF LIABILITY, WHETHER IN CONTRACT, SOFTWARE, EVEN IF ADVISED OF THE CONTRACT, TORT OR OTHERWISE, ARISING STRICT LIABILITY, OR TORT (INCLUDING POSSIBILITY OF SUCH DAMAGE.
- Page 57 IEEE Standard Portable Operating System Interface dhcpd Portions of Libevent are based on works by others, for Computer Environments (POSIX), copyright C also made available by them under the three-clause Copyright (c) 2004-2011 by Internet Systems 1988 by the Institute of Electrical and Electronics BSD license above.
- Page 58 MERCHANTABILITY, FITNESS FOR A LIABLE FOR ANY DIRECT, INDIRECT, PARTICULAR PURPOSE, TITLE AND NON- INCIDENTAL, SPECIAL, EXEMPLARY, OR THE BASIC LIBRARY FUNCTIONS INFRINGEMENT. IN NO EVENT SHALL THE CONSEQUENTIAL DAMAGES (INCLUDING, --------------------------- COPYRIGHT HOLDERS OR ANYONE BUT NOT LIMITED TO, PROCUREMENT OF Written by: Philip Hazel DISTRIBUTING THE SOFTWARE BE LIABLE...
-
Page 59: Index
Preset mode BRT CINE ..........16 Index Film Mode ..........21 BRT TV ..........16 Front/Right side ........3 CINEMA DIGITAL ......16 CINEMA FILM 1 ......16 Numerics CINEMA FILM 2 ......16 Gamma Correction .........21 GAME ..........16 3D glasses PHOTO ..........16 3D glasses communication range ..13 REF ............16 Using the 3D glasses ...... - Page 60 Sony Corporation...