Panasonic KX-MB1500C Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Multi-function printer
  5. KX-MB1500C
  6. Operating instructions manual
Panasonic KX-MB1500C Operating Instructions Manual

Panasonic KX-MB1500C Operating Instructions Manual

Panasonic kx-mb1500c; kx-mb1520c multi-function printer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
The pictured model is KX-MB1500.
R Do NOT connect the unit to a computer with the USB cable until prompted to do so during the setup
of Multi-Function Station (CD-ROM).
KX-MB1520 only:
R This unit is compatible with Call Display. Subscription to the appropriate service through your
service provider/telephone company is required.
Operating Instructions
Model No.
Multi-Function Printer
KX-MB1500C
KX-MB1520C

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic KX-MB1500C

  • Page 1 Operating Instructions Multi-Function Printer KX-MB1500C Model No. KX-MB1520C The pictured model is KX-MB1500. R Do NOT connect the unit to a computer with the USB cable until prompted to do so during the setup of Multi-Function Station (CD-ROM). KX-MB1520 only: R This unit is compatible with Call Display.
  • Page 2 R All other trademarks identified herein are the property of their respective owners. Copyright: R This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.
  • Page 3 R The printer of this unit utilizes a laser. Use of controls or adjustments or performance of procedures other R For optimal performance, genuine Panasonic toner than those specified herein may result in hazardous cartridge is recommended. We cannot be radiation exposure.
  • Page 4 Important Information R Do not cover slots or openings on the unit. Inspect – Copyright material or trademarks without the the air circulation vents regularly and remove any consent of the owner dust build-up with a vacuum cleaner (A). – Postage stamps and other negotiable instruments This list is not inclusive and no liability is assumed for either its completeness or accuracy.

  • Page 5: Table Of Contents

    Table of Contents 1. Introduction and Installation Receiving a fax manually : Auto answer OFF .............38 Accessories Using the unit with an answering Supplied accessories ........7 machine ............39 Accessory information ........7 Junk fax prohibitor (preventing fax reception Finding the Controls from undesired callers) ........40 Button descriptions ........8 Receiving a fax on your computer ....41...
  • Page 6 Table of Contents 14. General Information Printed Reports 14.1 Reference lists and reports ......72 Specifications 14.2 Specifications ..........72 15. Index 15.1 Index............75...

  • Page 7: Introduction And Installation

    1.2 Accessory information n Replacement accessory To ensure that the unit operates properly, we recommend the use of a Panasonic toner cartridge. – Toner cartridge R Model No. (Part No.): KX-FAT410A R Prints about 2,500 pages at ISO/IEC 19752 standard page.

  • Page 8: Button Descriptions

    1. Introduction and Installation MMuteN (KX-MB1520 only) 1.3 Button descriptions R To mute your voice during a conversation. Press again to resume the conversation. MSP-PhoneN (KX-MB1520 only) R To make or receive phone calls. Navigator key R To select desired settings. R To adjust the volume (KX-MB1520 only) G H I J K M N O...

  • Page 9: Overview

    1. Introduction and Installation 1.4.2 Rear view 1.4 Overview 1.4.1 Front view B C D E F G Rear cover Power switch Power inlet USB interface connector * The pictured model is KX-MB1520. Speaker (KX-MB1520 only) Recording paper exit R The unit can hold up to approximately 30 sheets of printed paper.

  • Page 10: Toner Cartridge

    R Do not add toner to the toner cartridge. We cannot be responsible for any damage to the unit or degradation of print quality which may occur from the use of a non-Panasonic toner cartridge. Remove the toner cartridge from the protective bag. Open the front cover (A).
  • Page 11 Hold the toner cartridge (A) by the centre handle, then insert firmly to lock into place. R To ensure that the unit operates properly, we recommend the use of a Panasonic toner cartridge. See page 7 for accessory information. Waste disposal method...

  • Page 12: Connections

    1. Introduction and Installation Note: 1.6 Connections R Do not place any objects within 10 cm (4 inches) of the right and left sides of the unit. Caution: R If any other device is connected to the same R When you operate this product, the power outlet telephone line, this unit may disturb the network should be near the product and easily accessible.

  • Page 13: Turning The Power On

    1. Introduction and Installation 1.7 Turning the power ON 1.8 Recording paper Turn the power switch to the ON position (A). Note for recording paper: R We recommend that you test paper (especially special sizes and types of paper) on the unit before purchasing large quantities.
  • Page 14 1. Introduction and Installation R The unit is set for printing letter-size plain paper Load the paper, print-side down (A). by default. Important: – To use other paper sizes, change the R Push down to lock the plate (B) in the paper recording paper size setting (feature #380 on input tray, if necessary.
  • Page 15 1. Introduction and Installation R After use, pull up the paper exit, and then replace the Insert the paper input tray into the unit. tab (A) to the original position. Note: R If the paper is not loaded correctly, re-adjust the paper guides, or the paper may jam.
  • Page 16 1. Introduction and Installation Therefore, if you print with the cover closed, the 1.8.2 Manual input tray paper may jam inside the unit. You can use the manual input tray for printing with the computer and for copying. It can hold one page at a time. When printing or copying multiple pages, add the next page after the first page has been fed into the unit.

  • Page 17: Preparation

    2. Preparation 2.1 Dialing mode (KX-MB1520 2.2 Selecting the operation mode only) (Scan/Copy) (Fax: KX-MB1520 2. . Preparation only) If you cannot dial (page 35), change this setting according to your telephone line service. You can select the desired mode by pressing the following button repeatedly.

  • Page 18: Setting The Original

    2. Preparation 2.3 Setting the original 2.4 Adjusting the volume (KX-MB1520 only) Important: R Before adjusting the volume, set the operation mode to fax mode. If the MFaxN light is OFF, turn it ON by pressing MFaxN repeatedly. MSetN MCNMDN MFaxN Ringer volume While the unit is idle, press MCN or MDN.

  • Page 19: Date And Time (Kx-Mb1520 Only)

    2. Preparation R If the time has not previously been set, Call Display 2.5 Date and time (KX-MB1520 will not adjust the clock. R You can turn this feature OFF (feature #226 on only) page 48). We recommend setting the date and time. The other party will receive your unit’s date and time as the header information.

  • Page 20: Your Logo (Kx-Mb1520 Only)

    2. Preparation 2.6 Your logo (KX-MB1520 only) 2.7 Your fax number (KX-MB1520 only) You can program your logo (name, company name, etc.) so that it appears on the top of each page sent. You can program your fax number so that it appears on the top of each page sent.

  • Page 21: Installing Multi-Function Station

    2.8.1 Required computer environment cable. If the unit is connected to a computer with the USB cable before installing Multi-Function Panasonic Multi-Function Station software enables the Station, the [Found New Hardware Wizard] unit to carry out the following functions: dialogue box will appear. Click [Cancel] to close –...
  • Page 22 Click [Install], then follow the on-screen instructions. [Start] A [All Programs] or [Programs] A R The files will be copied to your computer. [Panasonic] A the unit’s name A [Uninstall]. Then follow the on-screen instructions. Important notice If you are using Windows XP, Windows Vista or Windows 7, a message may appear after connecting the unit with the USB cable.

  • Page 23: Starting Multi-Function Station

    R To display usage tips. Station R To display information about Multi-Function Station. [Start] A [All Programs] or [Programs] A [Panasonic] A the unit’s name A [Multi-Function Note: Station] R You can confirm if the unit is connected to your R Multi-Function Station will appear.
  • Page 24 2. Preparation For Windows Vista: 1. [Start] A [Control Panel] A [Internet Options] A [Programs] A [Set programs] A [Set program access and computer defaults] R If the [User Account Control] dialogue box appears, click [Continue]. 2. [Custom] 3. Select the desired MAPI-compliant Email software such as [Windows Mail], etc.

  • Page 25: Printer

    3. Printer Setting the printer properties 3.1 Printing from Windows You can change the printer setting in step 3. We applications recommend that you test paper (especially special sizes 3. . Printer and types of paper) on the unit before purchasing large You can print a file created in a Windows application.

  • Page 26: Easy Print Utility

    [Output]: Number of prints, paper source, media type 3.2 Easy Print Utility [Quality]: Colour mode, toner save [Effects]: Header, watermark, footer By printing using the Panasonic Easy Print Utility instead of the printer driver, you can use useful printing features Combining multiple documents for your convenience.

  • Page 27: Scanner

    4. Scanner the software that is associated to open PDF files 4.1 Scanning from the unit (Push will start. Scan) R When scanning to email, the email software will automatically start and the scanned image will be 4. . Scanner You can easily scan the document by using the operation attached to a new email message.

  • Page 28: Scanning From A Computer (Pull Scan)

    4. Scanner The [Select...] button will not be displayed when 4.2 Scanning from a computer there is only one printer driver installed. R You can move, copy and delete a file or page. (Pull Scan) 4.2.3 Using other applications 4.2.1 Using Multi-Function scan application Multi-Function Station includes a TWAIN and WIA By clicking an application icon, the selected application compliant scanner driver.

  • Page 29: Copier

    5. Copier To select the copy size 5.1 Making a copy 1. Press MCopy SizeN (KX-MB1500)/MSizeN (KX-MB1520) repeatedly to select “ORIGINAL 5. . Copier SIZE”. 2. Press MCN or MDN repeatedly to select the size of your original document. A MSetN 3.

  • Page 30: More Copying Features

    5. Copier Example: 150 % enlarged copy 5.2 More copying features Original document Enlarged copy R Make sure that the MCopyN light is ON. 5.2.1 Zoom copy (enlargement / reduction) Set the original (page 18). Press MZoomN repeatedly to select the zoom rate that Example: 70 % reduced copy fits the size of your document and recording paper.
  • Page 31 5. Copier Note: For quick ID copy feature R The unit will store the documents into memory while collating the copies. If the memory becomes full while Original document Page layout storing, the unit will only print out the stored pages. “2 in 1”...
  • Page 32 5. Copier Note: Original document Page layout R You can save the previous page layout setting “4 in 1” (feature #467 on page 54). 5.2.5 N in 1 feature You can save paper by copying 2, 4 or 8 pages onto 1 page.
  • Page 33 5. Copier Enter the desired edge width of long edge using the Original document Page layout dial keypad. A MSetN “8 in 1” “PORTRAIT” Press MCN or MDN repeatedly to select “SHORT EDGE”. A MSetN Enter the desired edge width of short edge using the dial keypad.
  • Page 34 5. Copier – while the unit is printing received fax documents (KX-MB1520 only). Set the original (page 18). While “PC PRINTING” or “PRINTING” (KX-MB1520 only) is displayed, switch to copy mode by pressing MCopyN repeatedly (page 17), then press MStartN. Make necessary settings such as number of copies, resolution, zoom features and page layout features.

  • Page 35: Fax (Kx-Mb1520 Only)

    6. Fax (KX-MB1520 only) To select the contrast 6.1 Sending a fax manually Adjust this setting depending on the darkness or lightness of the document. 5 levels (low to high) are 6. . Fax (KX-MB1520 only) available. 1. Press Mc/dN repeatedly to display “CONTRAST”. 2.

  • Page 36: Storing Items In The Phonebook

    6. Fax (KX-MB1520 only) #402 is activated (page 50). For an explanation of the 6.3 Sending a fax using messages, see page 59. phonebook 6.2 Storing items in the Before using this feature, store the desired names and telephone numbers into the phonebook (page 36). phonebook R Make sure that the MFaxN light is ON.

  • Page 37: Sending An Electronic Document As A Fax Message From Your Computer

    6. Fax (KX-MB1520 only) – [Do not enter a fax number directly]: You can 6.4 Sending an electronic only select fax numbers stored in the phonebook. – [Re-enter to confirm the fax number]: When document as a fax message from entering the fax number using the dial keypad your computer display, re-entry of the number is required.

  • Page 38: Receiving A Fax Automatically : Auto Answer On

    6. Fax (KX-MB1520 only) 6.5 Receiving a fax automatically : 6.6 Receiving a fax manually : Auto answer ON Auto answer OFF R A4 or letter size recording paper can be used. R A4 or letter size recording paper can be used. 6.5.1 Activating FAX ONLY mode 6.6.1 Activating TEL mode Press MFax Auto AnswerN repeatedly to display “FAX...

  • Page 39: Using The Unit With An Answering Machine

    6. Fax (KX-MB1520 only) Note: 6.7 Using the unit with an R To stop receiving, see page 58. answering machine R To receive fax documents using the extension telephone, make sure remote fax activation is turned ON (feature #434 on page 52) beforehand. The 6.7.1 Setting up the unit and an answering default setting is OFF.

  • Page 40: Junk Fax Prohibitor (Preventing Fax Reception From Undesired Callers)

    6. Fax (KX-MB1520 only) – remote access to your phone company’s Voice 6.8 Junk fax prohibitor Mail (if you subscribed) (preventing fax reception from Note: R If the call is a phone call, the answering machine will undesired callers) record voice messages. If you subscribe to Call Display service (page 42), this If a fax calling tone is detected, the fax machine will feature prevents fax reception from calls that do not show...

  • Page 41: Receiving A Fax On Your Computer

    6. Fax (KX-MB1520 only) 2. Press MEN repeatedly to display “JUNK LIST 6.9 Receiving a fax on your DISP.”. A MSetN computer 3. Press MCN or MDN repeatedly to display the desired item. A MFN You can receive a fax document on your computer. The R To cancel erasing, press MStopN, then press received fax document is saved as an image file MMenuN.

  • Page 42: Call Display (Kx-Mb1520 Only)

    7. Call Display (KX-MB1520 only) 7.1 Call Display service 7.2 Viewing and calling back using caller information This unit is compatible with the Call Display service 7. . Call Display (KX-MB1520 only) offered by your local telephone company. To use this If the MFaxN light is OFF, turn it ON by pressing unit’s Call Display features, you must subscribe to a MFaxN repeatedly.

  • Page 43: Storing Caller Information Into The Phonebook

    7. Call Display (KX-MB1520 only) MSetN R To cancel erasing, press MStopN, then MMenuN. MSetN A MStopN 7.3.2 Erasing specific caller information R Make sure that the MFaxN light is ON. MCaller IDN Press MCN or MDN repeatedly to display the desired item.

  • Page 44: Distinctive Ring (Kx-Mb1520 Only)

    8. Distinctive Ring (KX-MB1520 only) To use one phone number for the fax, program the ring 8.1 Distinctive Ring service pattern assigned for the fax (feature #431 on page 44). In the example, the ring pattern assigned for fax is a triple When a call is made to one of your phone numbers, the ring, so you should program “C”...

  • Page 45: Programmable Features

    9. Programmable Features 9.1 Programming MMenuN 9. . Programmable Features MSetN MMenuN Press MBN and the 3-digit code (page 46 to page 56). Press the appropriate selection to display the desired setting. R This step will vary depending on the feature. MSetN Press MMenuN to exit.

  • Page 46: Basic Features

    9. Programmable Features 9.2 Basic features Feature/Code Selection Setting the quick setup You can print out the quick fax setup guide and select the desired receiving MBNM1NM0NM0N mode depending on your situation. (KX-MB1520 only) M1N “FAX ONLY” (default): Use only as a fax (page 38). M2N “DIST.
  • Page 47 9. Programmable Features Feature/Code Selection Setting the ADSL mode When you use a DSL/ADSL line, this feature improves the reliability by reducing MBNM1NM2NM4N the transmission speed. (KX-MB1520 only) M0N “OFF” (default) M1N “ON” Note: R Calling charges may be higher than usual. Changing the LCD display M1N “NORMAL”...
  • Page 48 9. Programmable Features Feature/Code Selection Setting the beep sounds and M0N “OFF”: Deactivates this feature. keytones M1N “ON” (default): You will hear confirmation/error beep sounds and keytones. MBNM1NM6NM5N Note: R Even if this feature is set to “OFF”, the unit beeps in some cases. For example: –...
  • Page 49 9. Programmable Features Feature/Code Selection Setting the recording paper M1N “PLAIN PAPER” (default): 75 g/m² to 90 g/m² (20 lb to 24 lb) paper. type for paper input tray M2N “THIN PAPER”: 64 g/m² to 75 g/m² (17 lb to 20 lb) paper. MBNM3NM8NM3N Note: R This setting will be deactivated when printing from a computer.

  • Page 50: Fax Features (Kx-Mb1520 Only)

    9. Programmable Features 9.3 Fax features (KX-MB1520 only) Feature/Code Selection Erasing all items stored for M0N “NO” (default) the phonebook M1N “YES” MBNM2NM8NM9N R Disconnect the telephone line cord and USB cable before activating this feature. To erase all items: 1.
  • Page 51 9. Programmable Features Feature/Code Selection Sending a fax at a specific This feature allows you to take advantage of low-cost calling hours offered by time your telephone company. This feature can be set up to 24 hours in advance of MBNM4NM1NM2N the desired time.
  • Page 52 9. Programmable Features Feature/Code Selection Setting dial keypad entry M0N “OFF” (default): Deactivates this feature. restriction M1N “ON”: If you do not wish to dial a fax number manually using the dial keypad, MBNM4NM2NM1N activate this feature. Note: R If you select “ON”, you cannot make redial calls to fax numbers entered using the dial keypad.
  • Page 53 9. Programmable Features Feature/Code Selection Setting friendly reception To receive a fax automatically when you answer a call and hear a fax calling MBNM4NM3NM8N tone (slow beep). M0N “OFF”: You have to press MStartN, and then M2N for fax reception. M1N “ON”...

  • Page 54: Copy Features

    9. Programmable Features 9.4 Copy features Feature/Code Selection Setting the input tray to use M1N “#1” (default): The paper input tray is selected. The displayed paper size for copy depends on the recording paper size setting (feature #380 on page 48). MBNM4NM6NM0N M2N “#2”: The manual input tray is selected.

  • Page 55: Pc Print Features

    9. Programmable Features 9.5 PC print features Feature/Code Selection Changing the data timeout The unit will automatically print the remaining data in memory when the setting computer does not send data to the unit during the set time. MBNM7NM7NM4N 1. MMenuN A MBNM7NM7NM4N A MSetN 2.

  • Page 56: Scan Features

    9. Programmable Features 9.6 Scan features Feature/Code Selection Setting the scan mode for M1N “VIEWER” (default): The scanned image will be displayed in the Push Scan [Multi-Function Viewer] window. MBNM4NM9NM3N M2N “FILE”: The scanned image will be saved as a file. M3N “EMAIL”: The scanned image will be saved for email attachment.

  • Page 57: Useful Information

    10. Useful Information 10.1 Character entry (KX-MB1520 10.2 Status of the unit only) 10. . Useful Information 10.2.1 Using Remote Control The dial keypad is used to enter characters and numbers. You can easily operate the following functions from your –...

  • Page 58: Cancelling The Operations

    10. Useful Information 10.2.2 Using Device Monitor 10.3 Cancelling the operations You can confirm the setting information and current You can cancel the current operation from the unit. You status of the unit from your computer. can also select the desired operation to cancel. Start Multi-Function Station.

  • Page 59: Help

    11. Help 11.1 Report messages (KX-MB1520 only) To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the 11. . Help confirmation and journal reports (page 35). Message Code Cause & Solution COMMUNICATION ERROR 40-42 R A transmission or reception error occurred.

  • Page 60: Display Messages

    11. Help 11.2 Display messages To indicate the unit’s status, one or more of the following messages will appear on the display. Display Cause & Solution “CALL SERVICE” R There is something wrong with the unit. Contact our service personnel. “CHANGE CARTRIDGE”...
  • Page 61 11. Help Display Cause & Solution “MEMORY FULL” R When performing memory transmission, the document being stored exceeded the memory capacity of the unit. Send the entire document manually. R When making a copy, the document being stored exceeded the memory capacity of the unit.

  • Page 62: When A Function Does Not Work

    11. Help 11.3 When a function does not work 11.3.1 General Problem Cause & Solution The unit does not work. R Check the connections (page 12, 22). The output tray becomes full R High humidity may cause the recording paper to curl. Try turning the paper quickly or the recording paper over and re-inserting it.
  • Page 63 11. Help Problem Cause & Solution The unit is beeping the R Press MStopN to stop the beeping sound. The unit beeps when the off-hook off-hook alert (KX-MB1520 alert (feature #171 on page 48) is activated, and the unit is in the following only).
  • Page 64 11. Help 11.3.3 Scanner Problem Cause & Solution I cannot scan. R When scanning at a high resolution, a large amount of available memory is required. If your computer warns that there is insufficient memory, close other applications and try again. R Select a lower resolution and try again.
  • Page 65 11. Help Problem Cause & Solution The other party complains R Try copying the document. If the copied image is clear, there may be about the quality of their something wrong with the other party’s machine. received documents. If the copied image is not clear, too dark, or black and white lines or smudges appear, refer to “11.3.2 Printing problems”, page 63.
  • Page 66 11. Help Problem Cause & Solution When an extension telephone R You must set remote fax activation to ON (feature #434 on page 52) is connected, I cannot receive beforehand. documents by pressing R Press MGNMBNM9N firmly. MGNMBNM9N. R You may have changed the remote fax activation code from MGNMBNM9N (default setting).
  • Page 67 Select [Modify Utilities] or [Add Multi-Function Station Driver]. Then follow the on-screen instructions. Important: R For users of versions prior to 1.21, download the latest software as follows, then activate it. [Start] A [All Programs] or [Programs] A [Panasonic] A the unit’s name A [Support Web Page]. Then follow the on-screen instructions.

  • Page 68: Paper Jams

    12. Paper Jams 2. Push down both green levers (A) until they stop. 12.1 Recording paper jam 12. . Paper Jams 12.1.1 When the recording paper has jammed inside of the unit The display will show the following: – “PAPER JAMMED” “OPEN REAR COVER”...
  • Page 69 12. Paper Jams 4. Push up the green levers (A) to the original position. 2. Remove the jammed paper (A) carefully by pulling it toward you. R If the recording paper has jammed behind the toner cartridge, remove the toner cartridge (A) first, and remove the jammed paper (B).
  • Page 70 12. Paper Jams 3. Close the front cover. 12.1.2 When the recording paper is not fed into the unit properly The display will show the following: – “CHECK PAPER #1 PRESS START” Pull the paper input tray completely out. Re-load the recording paper. Insert the paper input tray into the unit.

  • Page 71: Cleaning

    13. Cleaning Close the document cover. 13.1 Cleaning the white plates and glass 13. . Cleaning Clean the white plates and glass when a black line, a white line or a dirty pattern appears on: – your recording paper, – the original document, –...
  • Page 72 14. General Information 14.1 Reference lists and reports 14.2 Specifications You can print out the following lists and reports for your n Applicable lines 14. . General Information reference. Public Switched Telephone Network – “SETUP LIST” n Document size: – “TEL NO. LIST” Max.
  • Page 73 14. General Information ITU-T No.1 Test Chart Standby: Approx. 3.3 W (KX-MB1500) Approx. 3.6 W (KX-MB1520) Preheat: Approx. 55 W Copy: Approx. 320 W Maximum: Approx. 900 W (When the fuser lamp turns n Power supply: 120 V AC, 60 Hz n Memory capacity (for operation and storing memory): 32 MB...
  • Page 74 1.6 Document tray 1.7 Output tray1.8 Recording paper2. Preparation 2.1 Connections 2.2 Turning the power switch ON Help Button2.3 Help function Volume Thank you for purchasing a Panasonic fax machine. Things you should keep a record of Attach your sales receipt here.
  • Page 75 15. Index #494 Scan parameter hold: 56 15.1 Index #774 Data timeout: 55 #776 Mutual A4/letter print: 55 #100 Quick setup: 46 ADSL mode (Feature #124): 47 #101 Date and time: 19 Answering machine: 39 #102 Your logo: 20 Auto reduction (Feature #432): 52 #103 Your fax number: 20 #110 Language: 46 #120 Dialing mode: 17...
  • Page 76 15. Index Extension telephone: 38 PC fax setting (Feature #442): 53 PC print features: 55 Phonebook All erase (Feature #289): 50 Fax activation code (Feature #434): 52 Sending faxes: 36 Fax features: 50 Storing: 36 Fax number (Feature #103): 20 Power failure: 67 Fax number re-entry (Feature #422): 52 Power save (Feature #403): 49...
  • Page 77 15. Index TEL mode: 38 Telephone number list: 72 Time adjustment (Feature #226): 48 Toner cartridge: 10 Toner cartridge life: 74 Toner save (Feature #482): 11, 49 Volume: 18 Zoom hold (Feature #468): 54...
  • Page 78 Notes...
  • Page 79 Notes...
  • Page 80 *MB1500C* *MB1500C* PNQX3902ZA C0711HT0-CD...

This manual is also suitable for:

Kx-mb1520c

Table of Contents