Status Monitor; Running A Printer Operation Check - Epson WP-4011 User Manual

WP-4011/4015/4025/4090/4091/4095
Lights Problem and solution
General error
An unknown printer error has occurred.
Recovery mode
The firmware update has failed, and the printer is
in recovery mode.
= on, = off,

Status monitor

If a problem occurs while printing, an error message will appear in the status monitor window.
When you need to replace an ink cartridge or a maintenance box, click the How To button on the window, and the
status monitor will lead you step-by-step through the cartridge or the maintenance box replacement procedure.
Note for Windows users:
If EPSON Status Monitor 3 does not appear, access the printer driver and click the Maintenance tab and then the Extended
Settings button. In the Extended Settings window, check the Enable EPSON Status Monitor 3 check box.
To confirm the status of each ink cartridge, see one of the following sections:
"Using EPSON Status Monitor 3" on page 84
&
"Using EPSON Status Monitor" on page 86
&

Running a printer operation check

If you are unable to determine the source of the problem, run a printer operation check to help you determine whether
the problem comes from the printer or your computer.
To run a printer operation check, follow these steps.
A
Make sure the printer is turned off.
B
Make sure that A4-size paper is loaded in the paper cassette.
User's Guide
Troubleshooting
= flashing slowly, flashing fast
(Windows)
(Mac OS X)
83
Try the following solutions.
1. & "Removing jammed paper from the paper
cassette(s)" on page 90
2. & "Removing jammed paper from the rear
unit" on page 88
3. & "Removing jammed paper from the front
cover and the output tray" on page 89
4. Press the P button to turn off the printer, and
then press the P button again to turn the printer
back on.
If the error does not clear, contact your dealer.
You will need to re-attempt the firmware update.
Ready a USB cable and visit your local Epson
website for further instructions.