Advertisement
Quick Links
BID SPECIFICATION
FOR
PRODUCTION CRT MONITORS
MODEL NUMBER
PVM-96
INSTRUCTIONS:
REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND
PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST YOU IN
CLEARLY SPECIFYING THE SONY PRODUCT IDENTIFIED ABOVE, AND ENSURING
THAT THE BUYER IS WELL INFORMED OF THE HIGH STANDARD OF
PERFORMANCE THAT IS TO BE EXPECTED OF A SONY PRODUCT. THE
INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JUNE 2002. PRODUCT
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
SONY ELECTRONICS INC.
DISPLAY PRODUCTS GROUP
1 SONY DRIVE, MD S3D9
PARK RIDGE, NJ 07656
TEL# (201)-930-1000, FAX# (201)-358-4303
Advertisement
Summary of Contents for Sony PVM-96
- Page 1 CLEARLY SPECIFYING THE SONY PRODUCT IDENTIFIED ABOVE, AND ENSURING THAT THE BUYER IS WELL INFORMED OF THE HIGH STANDARD OF PERFORMANCE THAT IS TO BE EXPECTED OF A SONY PRODUCT. THE INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JUNE 2002. PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
-
Page 2: General Information
General Information The purpose of this information is to provide the specification for a product whose primary purpose is the reproduction of video and / or computer graphics information for one or more viewers. This reproduction of this information is to be accomplished via a direct-view CRT monitor. -
Page 3: Performance Specifications
User Interface / Controllability Information Control of this device shall be accomplished through the use of front panel controls that display on on-screen menus, available in a minimum of 5 languages. A status menu shall display current device settings. The following device functions shall be available for control: Power On / off Input Select Brightness / Contrast... -
Page 4: Dimensional Information
This device shall employ the use of a mode displaying horizontal and vertical intervals on the center of the screen. This device shall include the capability to switch between 4:3 and 16:9 aspect ratios. Dimensional Information This device shall employ the use of a 9” diagonal (9” viewable) CRT. This device shall have maximum cabinet dimensions of 8.63 inches high by 8.63 inches wide and 9.88 inches deep. - Page 5 FCC Class A IC Class A CE EN55022 Class-B / EN50082 - 1 / EN60555 – 2 VCCI-I 10.0 Warranty Information This device shall carry a 1-year manufacturer’s warranty. Authorized servicing dealers of the devices’ manufacturer shall perform warranty service.