Epson ESC/VP21 User Manual page 30

\V1
\V2
\Xn Set XON/XOFF Passthrough
If software flow control is enabled (\Ql), this command defines whether the XON
(11 hex) and XOFF (13 hex) characters received from the DTE are sent to the
remote modem. In addition, if the modem port flow control is enabled (\G1) in
normal mode, the command specifies whether the XON and
received from remote modem are sent to the DTE. In both cases, flow control
operation is not affected.
\X0
\X1
\Y Switch to Reliable Mode
in normal mode (\N0), the modem attempts to originate or answer an MNP link
request, depending on whether the modem originated or answered the physical
connection, respectively. The remote modem must attempt to answer/originate the
MNP link for the link to be established.
22
Enables modified MN P codes.
Enables extended V.42 codes.
Processes flow control characters. (default)
Processes flow control characters and
passes them through to the local or remote
so they can process the characters.
characters
XOFF
COMMAND REFERENCE - 2