Related Manuals for Canon MF9100 Series
Summary of Contents for Canon MF9100 Series
- Page 1 PCL Printer Kit-AK1 SERVICE MANUAL October 29, 2010 Rev. 0 COPYRIGHT © 2010 CANON INC. CANON PCL Printer Kit-AK1 REV. 0 PRINTED IN U.S.A.
- Page 3 Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual.
- Page 4 Introduction Symbols Used This documentation uses the following symbols to indicate special information: Symbol Description Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning. Indicates an item requiring care to avoid electric shocks. Indicates an item requiring care to avoid combustion (fire). Indicates an item prohibiting disassembly to avoid electric shocks or problems.
- Page 5 Introduction The following rules apply throughout this Service Manual: 1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer- ence to the timing of operation. In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol , the arrow indicates the direction of the electric signal.
-
Page 7: Table Of Contents
Contents Contents Chapter 1 Specifications 1.1 Product composition ...........................1- 1 1.1.1 Main body configuration (USA)..........................1- 1 1.2 Specifications .............................1- 1 1.2.1 Specification ................................1- 1 1.2.2 PCL Printer Driver ..............................1- 2 Chapter 2 Functions 2.1 Basic Function ............................2- 1 2.1.1 WSD .................................. - Page 8 Contents...
-
Page 9: Chapter 1 Specifications
Chapter 1 Specifications... - Page 11 Contents Contents 1.1 Product composition ..............................1-1 1.1.1 Main body configuration (USA) ..............................1-1 1.2 Specifications .................................1-1 1.2.1 Specification ....................................1-1 1.2.2 PCL Printer Driver ..................................1-2...
-
Page 13: Product Composition
Chapter 1 1.1 Product composition 1.1.1 Main body configuration (USA) 0025-5397 iR C1030 T-1-1 Merchandise control name iR C1030iF iR C1030 Printing speed 30/22ppm 30/22ppm Standard function COPY COPY PRINT PRINT SEND SEND Standard Option Option Option BarDIMM Option Option 1.2 Specifications 1.2.1 Specification 0025-5409... -
Page 14: Pcl Printer Driver
Chapter 1 T-1-4 Main scaning Sub scaning UFR II 5.0(mm) 5.0(mm) Non-Envelope 10.0(mm) 10.0(mm) Envelope 1/6(inch) 1/6(inch) 4.0(mm) 4.0(mm) Paper Requirements T-1-5 Paper drawer(s) Stack bypass tray Size (W x L) Legal*8, Letter*8, Oficio, M-Oficio, B-Oficio, 3" x 5" to Legal (8 1/2" x 14") Executive, Foolscap*8, A4*8, A5, B5 (76.2 x 127 to 215.9 x 355.6 mm) (Always set vertically.) - Page 15 Chapter 1 *GDI Vector Fonts available 1 byte fonts such as Modern, Roman, Script, etc. *TrueType Fonts available 1 byte fonts such as Arial, Courier New, Symbol, Times New Roman, etc. -PCL6 PCL6 controls the texts if: 1. Characters are enlarged or reduced. 2.
-
Page 17: Chapter 2 Functions
Chapter 2 Functions... - Page 19 Contents Contents 2.1 Basic Function................................2-1 2.1.1 WSD......................................2-1 2.1.2 PDL Selection (PnP) ..................................2-1 2.1.3 Settings for toner density ................................2-2...
-
Page 21: Basic Function
2. End job notification When the device receives a print job, it issues the event notification upon completing paper delivery. Windows Vista can detect End job with this notification so that Canon utility is no longer needed. 3. Auto-update of device configuration information The driver collects information from Windows Vista and the device when started. -
Page 22: Settings For Toner Density
Chapter 2 There will be no detection or installation when there is no supporting driver in PC. Supported PDL: UFRII LT PCL5c PCL6 Setting is available in the following: Additional Functions > System Settings > PDL Selection(PnP) F-2-3 F-2-4 F-2-5 2.1.3 Settings for toner density 0025-5402 Settings for toner density:... - Page 23 Chapter 2 F-2-6...
-
Page 25: Chapter 3 Installation
Chapter 3 Installation... - Page 27 Contents Contents 3.1 Points to Note About Installation...........................3-1 3.1.1 Overview of the Installation Procedure ............................3-1...
-
Page 29: Points To Note About Installation
1. Using the following URL, access the LMS, and obtain the license key by following the instructions shown on the screen: http://www.canon.com/lms/license/ Memo: A license key is issued in exchange for the 16-digit number indicated on the License Access Number Certificate and the serial number of the device (e.g., ABC01234) to which the license will be registered. -
Page 31: Chapter 4 Maintenance
Chapter 4 Maintenance... - Page 33 Contents Contents 4.1 Reference matter in market service..........................4-1 4.1.1 SNMP......................................4-1 4.1.2 Port Configuration and SNMP Setting ............................4-1 4.2 Related Error code .................................4-2 4.2.1 The viewpoint of Error Codes..............................4-2 4.3 Related Service Mode ..............................4-4 4.3.1 Management of a License ................................4-4 4.3.2 Checking the License Option...............................
-
Page 35: Reference Matter In Market Service
This module supports SNMPv1 and does not support SNMPv3. Supported MIB: SNMPv1 agent mounted on this module supports the following MIFs. - A part of Canon MIB - A part of Printer MIB (RFC1759) - A part of TCP/IP MIB (RFC1213) -
Page 36: Related Error Code
Chapter 4 F-4-3 Reference: When SNMP is not set to ON, an error occurs in "Get Device Status". Start > Settings > Printers > Printer Properties > Device Settings >Get Device Status F-4-4 4.2 Related Error code 4.2.1 The viewpoint of Error Codes 0025-5325 Error codes are four columns of codes that are recorded in transmission error report or reception error report when error happened. - Page 37 Chapter 4 F-4-6 F-4-7 F-4-8...
-
Page 38: Related Service Mode
Chapter 4 F-4-9 F-4-10 4.3 Related Service Mode 4.3.1 Management of a License 0025-5328 Overview 1. Validate an optional function which has been installed but has not been validated based on the license key issued by a license issue server (hereinafter called "LMS"). -
Page 39: Checking The License Option
Chapter 4 The BarDIMM license can be added. The PCL license can be transferred or erased. (3) PCL OFF/BarDIMM ON This condition is created when the PCL license is transferred or erased in the condition of (4). > The BarDIMM license is ON, but it is not activated. (4) PCL/BarDIMM ON The PCL license can be transferred or erased. - Page 40 Chapter 4 F-4-11...
-
Page 41: Invalidating Transfer Of A License
Chapter 4 F-4-12 A license option confirmation example To check the validation of license option, see the SPEC REPORT. The details according to the list shown below. T-4-1 Item Name License Name Status/Optional Setting Color Universal SEND BW-SEND ON/ON CL-SEND ON/ON 4.3.3 Invalidating Transfer of a License 0025-5330... - Page 42 Chapter 4 When you have entered the service mode, use the upper and lower arrow keys to display items, and press the OK key to fix the setting. (2) Display LCNS-TR by selecting Copier > Option > LCNS-TR. (3) Press the OK key and display #LMS INACTIVE. (4) Select a desired license from valid ST licenses for which 0001 is displayed, and press the OK key.
- Page 43 Chapter 4 Operation Procedure (1) Enter the service mode and display the following service mode. When you have entered the service mode, use the right and left arrow keys to display items, and press the OK key to fix the setting. (2) Display LCNS-OF by selecting Copier >...
- Page 45 Oct 29 2010...