Specifications; Voltage Selection; Ac Power Supply Cord And Plug - Sharp WF-930ZBK Service Manual

WF-930Z
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
General
I
Power source: AC 110 - 127/220 - 240 V, 50/60 Hz
DC 12 V ["D" size (UM/SUM - 1, R20 or
HP - 2) battery x 8]
Power consumption: 30 W
Output power: PMPO; 60 W (30 W + 30 W)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 10 % T.H.D.)
Input terminal: Mixing microphone; 600 ohms
Output terminal: Headphones; 16 -50 ohms
(recommended; 32 ohms)
Dimensions: Width; 300 mm (11 - 13/16")
Height; 217 mm (8 - 9/16")
Depth; 186 mm (7 - 3/8")
Weight: 2.9 kg (6.4 Ibs.) without batteries
Radio section
I
Frequency range: FM; 88 - 108 MHz
SW1; 2.3 - 7.3 MHz
SW2; 7.3 - 22 MHz
MW; 526.5 - 1,606.5 kHz
Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage as
follows: Slide the AC power supply socket to the visible indication of the side of your local voltage.
9FGS9822020300
9FGS9821620000
9FGS9822020500
9FGS9822020400
All manuals and user guides at all-guides.com

SPECIFICATIONS

VOLTAGE SELECTION

AC POWER SUPPLY CORD AND PLUG

Tape recorder section
I
Frequency response: 60 - 12,000 Hz (Normal tape)
Signal/noise ratio: 40 dB (TAPE 1, recording/playback)
55 dB (TAPE 2, playback)
Wow and flutter: 0.15 % (WRMS)
Motor: DC 12 V electric governor
Bias system: AC bias
Erase system: Magnet erase
Speaker section
I
Type: 2 - way type
Speakers: 12 cm (4 - 3/4") free - edge
woofer x 2
Tweeter x 2
Maximum input
power: 10 W
Impedance: 3 ohms
Dimensions: Width; 195 mm (7 - 11/16")
Height; 217 mm (8 - 9/16")
Depth; 189 mm (7 - 1/2")
Weight: 1.2 kg (2.6 Ibs.)/each
Specifications for this model are subject to change without
prior notice.
– 2 –
QPLGA0250AFZZ
QPLGA0253AFZZ