Viewing Lamp Usage And Other Information; Solving Projector Operation Problems - Epson PowerLite 84 User Manual

Viewing Lamp Usage and Other Information

Use the Info menu to view information about the display settings of
your computer and the number of hours the lamp has been used.
Press the button and highlight the
Menu
You see the lamp usage hours and various input signal settings on the
right.
The life span of the lamp is about 5000 hours if the
setting in the Settings menu is set to
Control
6000 hours if the
Brightness Control
sure you have a spare lamp handy if the usage hours on this menu
are close to the life span of your lamp.

Solving Projector Operation Problems

The power doesn't turn on.
■ If the projector doesn't turn on when you press the Ppower
button, make sure the power cable is connected to the projector
and plugged into a working electrical outlet.
The power cable may be defective. Disconnect the cable from the
■
outlet and contact Epson as described on page 102.
Check to see if the A/V Mute slide is closed.
■
■ Check the status lights (see page 91).
The buttons on the projector don't work.
If the control panels buttons have been locked, try using the remote
control instead. See page 73 for information about locking the control
panel.
menu.
Info
Brightness
(default), and
High
setting is set to . Make
Low
note
The information displayed
depends on the input signal
currently selected.
Solving Problems
93