Intended Use - Black & Decker BDCD8C Manual

ENGLISH
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5. Battery tool use and care
a. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
b. Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
c. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
4
Output voltage
Current
Approx. charge time
Battery
nails, screws, or other small metal objects, that can
make a connection from one terminal to another.
Voltage
Shorting the battery terminals together may cause burns
Capacity
or a fire.
d. Under abusive conditions, liquid may be ejected from
Type
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,

Intended use

additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Your BLACK+DECKER BDCD8 - Drill, has been designed for
6. Service screwdriving applications and for drilling in wood, metal and
a. Have your power tool serviced by a qualified repair
plastics. This tool is intended for consumer use only.
person using only identical replacement parts. This will
Safety instructions
ensure that the safety of the power tool is maintained.
Additional power tool safety warnings
General power tool safety warnings
@
Warning! Read all safety warnings and all
Warning! Additional safety warnings for
instructions. Failure to follow the warnings
drills
and instructions listed below may result in
Š Use auxiliary handles supplied with the tool. Loss of
control can cause personal injury.
Save all warnings and instructions for future reference.
Š Hold power tool by insulated gripping surfaces when
The term "power tool" in all of the warnings listed below refers
performing an operation where the cutting accessory
to your mains operated (corded) power tool or battery oper-
may contact hidden wiring. Cutting accessory contacting
ated (cordless) power tool.
a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Š Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may
contact hidden wiring. Fasteners contacting a "live" wire
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Š Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding the
work by hand or against your body leaves it unstable and
may lead to loss of control.
Š Before drilling into walls, floors or ceilings, check for the
location of wiring and pipes.
Š Avoid touching the tip of a drill bit just after drilling, as it
may be hot.
Š The intended use is described in this instruction manual.
The use of any accessory or attachment or performance of
any operation with this tool other than those recommended
in this instruction manual may present a risk of personal
injury and/or damage to property.
Safety of others
Š This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the tool by a person responsible for their safety.
Š Children should be supervised to ensure that they do not
play with the appliance.
V
DC
600
mA
8
Hours
V 7.2
AC
1.5
Ah
Li-Ion
d.
e.
f.
3.
a.
b.
c.