Configure The Management Ip Address - Esxi; R640 Server Configuration For 10/25Gbe, 2Cpu, Sfp+/Sfp28 - Dell EMC VxFlex Ready Node 14G Manual

Description BMC
(iDRAC)
Monitoring
VMkernel port
Physical Mgmt Switch
Switch
Description BMC
(iDRAC)
Monitoring
Port BMC (iDRAC)
PCI slot N/A
Physical Port BMC (iDRAC)
on node (remote KVM)
Speed 1 GbE
vSwitch N/A
VMkernel port
Physical Mgmt Switch
Switch

Configure the Management IP address - ESXi

Table 10 R640 server configuration for 10/25GbE, 1CPU, SFP+/SFP28 (continued)
VxFlex OS VxFlex OS
Data1 Client
Network
Port1
vmk2 User
configurable
Switch 1 Switch 1
Table 11 R640 server configuration for 10/25GbE, 2CPU, SFP+/SFP28
VxFlex OS VxFlex OS
Data1 Client
Network
Port1
vmnic0 vmnic1
N/A N/A
PCI 10/25 PCI 10/25
GbE (Left) GbE (Right)
10/25 GbE 10/25 GbE
sio_vSwitch1 User allocated User allocated sio_vSwi
vmk2 User
configurable
Switch 1 Switch 1
Note
This configuration supports more than one PCIe-based NIC in slots 2 and 3.
Configure the Management IP address using the ESXi console.
Procedure
1. Open the ESXi KVM console.
2. From the console, press F2 to open the Customize System/View Logs menu.
The Authentication Required window is displayed.
3. Type the server password defined during installation: ScaleIO123
Wait a few seconds for the System Customization window to appear; if it does
not, press F2 again.
VxFlex OS VxFlex
Client OS
Network Data2
Port2
User vmk3
configurable
Switch 2 Switch 2 Mgmt Switch/
VxFlex OS VxFlex
Client OS
Network Data2
Port2
vmnic4 vmnic5
N/A N/A
PCI 10/25 PCI
GbE (Right) 10/25
GbE
(Left)
10/25 GbE 10/25
GbE
tch2
User vmk3
configurable
Switch 2 Switch 2 Mgmt Switch
Configure the Management IP address - ESXi
Port Configuration
VxFlex OS Not in Use
Managemen
t Network
vmk0 N/A
N/A
Switch 2
VxFlex OS Not in Use
Managemen
t Network
vmnic2 N/A
N/A N/A
Onboard 1 GbE N/A
(Left)
1 GbE N/A
vSwitch0 N/A
vmk0 N/A
N/A
47