PowerLite ® 6110i Quick Setup Unpack the projector You should have the following items: Projector Cable cover Power cord Computer cable User’s Guide Remote control Password protect CD-ROM and batteries sticker *411247000* *411247000*...
Connect your video source Connect the projector to a computer or video source using any of the available connections shown below. • Check the connectors on your video equipment. If more than one connection is available, choose the one that provides the best quality.
Choose a location The projector supports 4 viewing setups. Choose the best one for your environment. If you install the projector in a rear or overhead position, you’ll need to choose the correct projection option, identified below, from the Extended menu. See the User’s Guide on your CD-ROM for instructions.
Plug in and turn on Connect the power cord to the projector and plug the other end into an electrical outlet. Power light on the projector turns orange. Power light Turn on your computer or video source. Press the Power button on the projector or remote control.
Install your User’s Guide and register your projector Insert the PowerLite 6110i CD-ROM in your drive. If the installer doesn’t open automatically, double-click the Epson CD-ROM icon, then double-click the Epson installer icon. Follow the instructions on the screen to register.
Select VGA Display or Color LCD, click Arrangement or Arrange, and make sure Mirror Displays is checked. Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks and Epson Store is a service mark of Epson America, Inc.