Operation; Maintenance; Transportation, Storage And Disposal - Husqvarna 5776165-11 Operator's Manual

understand and obey the instructions. Save these
instructions.
• For optimal fit and function, make sure that you have
selected the correct product for your use. Refer to
Size ranges, hearing protection on page 4 .
• Do not change or remove parts on the product. Only
do changes that are given in this operator's manual.
• This product may be adversely affected by certain
chemical substances. Further information should be
sought from the manufacturer. Keep away from
aggressive substances and clean the product
regularly. Use a cloth with water and soap for
cleaning. Do not wash or put fully into water.
• Only use Husqvarna original spare parts.
Safety instructions for operation,
hearing protection
• The wearer should ensure that the earmuffs are
worn at all times in noisy environments.
• The noise attenuation of the product will be severely
impaired if you do not follow the instructions in this
To put the earmuffs in operation
position
1. Put on the headband and adjust the earmuffs around
your ears.
To do maintenance on the product
CAUTION:
product fully into water.
1. Clean the product regularly. Use a cloth with a weak
soap solution.
2. Do a check of the condition of the sealing rings and
the PU foam inserts before each use.
Transportation and storage
• Make sure that the sealing rings on the hearing
protection are not compressed.
• Make sure that the headband is not in tension.
• Put the product in a dry and clean space with correct
temperature.
• Do not put the product in sunlight during storage and
ensure that they are protected from chemical and/or
physical damage.
1522 - 001 - 25.03.2021

Operation

Maintenance

Do not flush or put the

Transportation, storage and disposal

operator's manual. Earmuffs, and in particular
cushions, may deteriorate with use and should be
examined at frequent intervals for cracking and
leakage, for example.
• Be more careful and listen for warning signals when
you use the product. The noise from warning signals
can be decreased when you use the product.
• Make sure that the product is not hit during
transportation and use.
• Make sure that you know how to use the product
before use.
• The fitting of hygiene covers to the cushions, may
affect the acoustic performance of the earmuffs.
Always use original accessories.
• The wearer should ensure that the earmuffs are
fitted, adjusted and maintained in accordance with
this operator's manual.
• The product contains metallic components that can
increase electrical hazards.
• Never use the earmuffs longer than 2-3 years from
the manufacturing date stated on the packaging.
2. Adjust the earmuffs until they are tight around your
ears and tight against your head. Make sure that the
earmuffs decrease the noise sufficiently.
3. Replace the PU foam inserts if they are damaged.
a) Pull out the PU foam inserts from the earmuffs.
b) Install new PU foam insert into each of the
earmuffs. Use original spare parts.
c) Make sure that the edge of the PU foam insert is
fully below the sealing ring.
d) Make sure that the PU foam insert is flat or
slightly concave in the center.
e) Make sure that the PU foam inserts fully fill the
inner wall of the earmuff.
• Put the product in a safe space during transportation
and ensure that it is protected from chemical and/or
physical damage.
Disposal
• Obey national regulations.
• Use the local recycling system.
3