Storage - Honda HP311 User Manual

STORAGE
If the mini transporter will not be used for a period longer than 30 days,
follow the steps below to prepare your unit for storage.
1. Drain the fuel tank completely. Stored fuel containing ethanol or
MTBE can start to go stale in 30 days. Stale fuel has high gum
content and can clog the carburetor and restrict fuel flow.
2. Start the engine and allow it to run until it stops.This ensures no fuel
is left in the carburetor. Run the engine until it stops. This helps
prevent gum deposits from forming inside the carburetor and
possible engine damage.
3. While the engine is still warm, drain the oil from the engine. Refill
with fresh oil of the grade recommended in the Engine Manual.
4. Use clean cloths to clean off the outside of the machine and to keep
the air vents free of obstructions.
Do not use strong detergents or petroleum based
cleaners when cleaning plastic parts Chemicals can
damage plastics.
5. Inspect for any loose or damaged parts. Repair or replace
damaged parts and tighten loose screws, nuts or Bolts.
6. Store your unit on flat ground in a clean, dry building that has good
ventilation.
Do not store the machine with fuel in a non-ventilated
area where fuel fumes may reach flame, sparks, pilot
lights or any ignition sources.
34