Epson Stylus Pro 11880 User Manual page 147

Message
MAINTENANCE REQUEST
MAINTENANCE TANK
NEARLY FULL
NO CARTRIDGE
INSTALL INK CARTRIDGE
NO MAINTENANCE TANK
INSTALL THE XXX
MAINTENANCE TANK
NOT ENOUGH CAPACITY
REPLACE THE XXX
MAINTENANCE TANK
NOT ENOUGH INK
REPLACE INK CARTRIDGE
WITH A NEW ONE
NOZZLE CHECK ERROR
PRESS THE BUTTON
PAPER CUT ERROR
PRESS THE MENU BUTTON
TO MOVE THE CUTTER TO
REPLACEMENT POSITION
PAPER CUT ERROR
REMOVE UNCUT PAPER
PAPER EJECT ERROR
REMOVE PAPER FROM
PRINTER
PAPER ERROR
LOAD PAPER PROPERLY
PAPER LOW
Explanation
A printer part may need to
be replaced soon.
The indicated tank is
almost full.
Ink cartridge(s) not
installed.
The indicated maintenance
tank is not installed.
The indicated tank is
almost full.
The ink cartridge is nearly
expended.
Nozzle check cannot be
executed.
Roll paper was not cut
correctly.
Roll paper was not cut
correctly.
The cutter may be blunt.
Paper remains in the
printer.
Paper is not loaded
correctly.
The paper roll is almost
finished.
6-147
Solving Problems
Response
Note the code number and contact Epson as
described on page 10.
Although you can continue printing, you should
replace the tank as soon as possible.
Install ink cartridge(s); see page 127.
Make sure the maintenance tank is fully
inserted; see page 135.
Although you can continue printing, you should
replace the tank as soon as possible.
Replace the ink cartridge; see page 127.
Press the Pause button to clear the error,
then try the nozzle check again. Or cancel the
nozzle check from the computer and restart the
printer.
Release the paper lever and cut the paper
manually. Reload paper if necessary.
Release the paper lever and cut the paper
manually. Reload paper if necessary.
Reinstall or replace the cutter blade if
necessary; see page 132.
Release the paper lever and remove the paper.
Release the paper lever and reload paper.
Replace the roll paper.
| 147