Recording - Philips FW-C58 Manual

All manuals and user guides at all-guides.com

RECORDING

MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT TIMER REC
NEWS T.A. AM MW FM LW
60Hz
250Hz 500Hz 1KHz
CLOCK/
CD1 • 2 • 3 BAND
TIMER
CD TUNER
PROG
SEARCH • TUNING STOP•CLEAR
SOUND NAVIGATION
INCREDIBLE
SURROUND
DIGITAL
SOUND CONTROL
OPEN
TAPE 1
20
Untitled-5 20
Notes:
– It is not possible to change tape side
STEREO
BACK
FRONT HSD
– If you do not intend to record via the
8KHz
2KHz 4KHz
TAPE 1 • 2 CDR/VIDEO
TAPE AUX
– For recording, use only tape of IEC type I
A. REV
PRESET
PLAY PAUSE PREV SIDE NEXT
– The tape is secured at both ends with
MIC
LEVEL
DYNAMIC BASS
MIC
BOOST
– The recording level is set automatically,
OPEN
– To prevent accidental recording, break
TAPE 2
– If " CHECK TAPE " is displayed, the
Recording from other sources
(only on tape deck 2)
during recording.
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
microphone, unplug the microphone to
2 Load a blank tape into tape deck 2 with
avoid accidental mixing with other
the open side downward.
recording source.
3 Press í or ë to select the recording
tape side (see Tape Side under TAPE
(normal tape) or IEC type II (Cr0 2 ).
section) .
4 Press CD, TUNER or AUX.
leader tape. At the beginning and end of
• Start playback of the selected source.
tape, nothing will be recorded for six to
5 Press REC to start recording.
seven seconds.
™ The
6 Press Ç to stop recording.
regardless of the position of Volume,
DBB, Incredible Surround or DSC. Notes:
– Only å å å å å or ∂
out the tab on the left shoulder of the during recording .
tape side you want to protect.
– During recording, it is not possible to
listen to another source.
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr0 2 tape
detection hole when covering the tab
opening.
6/8/01, 10:26 AM
starts flashing.
REC
∂ mode is available ∂ ∂ ∂
3139 116 19751