Epson EPL-N7000 Network Manual page 168

DNS Server Address Settings
Items
Acquire DNS Server
Address Automatically
DNS Server Address
Host Name and Domain Name Settings
Items
Acquire Host Name and
Domain Name
Automatically
Host Name
Domain Name
Register Network Interface
Address to DNS Server
Register Network Interface
Address Directly to DNS
Server
168
Network Software
Explanations
Select either Enable or Disable to acquire
the DNS server address from the DHCP
server.
Enter the DNS server address. When the
DHCP server does not respond even Enable
is selected for Acquire DNS server address
automatically, the DNS server address set
here is used.
Explanations
Select either Enable or Disable to acquire
the host name and domain name from the
DHCP server.
Enter the host name supported by Dynamic
DNS (between 2 and 63 characters). The
total number of characters of the host name
and the domain name must not exceed 251.
Leave it blank or enter two or more
characters of the domain name. The total
number of characters of the host name and
the domain name must not exceed 251.
Select Enable if you want to send the host
name and the domain name to the DHCP
server that supports Dynamic DNS update to
request for DNS dynamic updates.
Select Enable if you want to directly send the
host name and the domain name to the DNS
server that supports Dynamic DNS update to
request for DNS dynamic updates.When
Register the network interface's address to
DNS server is Disable, then this setting is the
same as Disable.