Safety - Husqvarna 5791167-03 Operator's Manual

Symbols and marks on
the visor holder
F
S
MM/YYYY
Compliance and approvals Hearing
Protection
The products meet the Essential Health and Safety
Requirements as laid out in Annex II and conforms with
quality assurance of the production process, module D,
Safety definitions
The definitions below give the level of severity for each
signal word.
WARNING:
CAUTION:
Note:
This information makes the product easier to
use.
General safety
WARNING:
instructions that follow before you use the
product.
• Read all the instructions in this operator's manual
before you use the product. Make sure that you
understand and obey the instructions. Save these
instructions.
1498 - 001 - 30.04.2021
Explanation
Protection against high-
speed particles (F = 45
m/s).
Protection against in-
creased robutness at a
speed of 5.1 m/s.
Mandatory conformity
marking for EEA.
Date of manufacture.
Manufacturers trademark.
Injury to persons.
Damage to the product.
Read the warning
laid out in Annex VIII of the PPE-Regulation (EU)
2016/425. CE markings are in accordance with
EN352-1:2002. The products are approved to module B
by BSI (NB 2797), BSI Group The Netherlands B.V. Say
Building, John M. Keynesplein 9, 1066 EP Amsterdam,
The Netherlands.
The full text of the EU declaration of conformity is
available at the following Internet addresses:
www.husqvarna.com and
www.universalaccessories.com. Search for the product.
Compliance and approvals Visor
The products meet the Essential Health and Safety
Requirements as laid out in Annex II and conforms with
quality assurance of the production process, module D,
laid out in Annex VIII of the PPE-Regulation (EU)
2016/425. CE markings are in accordance with
EN166:2001 for visor 5791167-02 and EN1731:2006 for
visor 5791167-04. The products are approved to module
B by BSI (NB 2797), BSI Group The Netherlands B.V.
Say Building, John M. Keynesplein 9, 1066 EP
Amsterdam, The Netherlands.
The full text of the EU declaration of conformity is
available at the following Internet addresses:
www.husqvarna.com and
www.universalaccessories.com. Search for the product.

Safety

• For optimal fit and function, make sure that you have
selected the correct product for your use. Refer to
Size ranges, hearing protection on page 5 .
• Do not change or remove parts on the product. Only
do changes that are given in this operator's manual.
• This product may be adversely affected by certain
chemical substances. Further information should be
sought from the manufacturer. Keep away from
aggressive substances and clean the product
regularly. Use a cloth with water and soap for
cleaning. Do not wash or put fully into water.
• Only use Husqvarna original spare parts.
Safety instructions for operation,
hearing protection
• The wearer should ensure that the earmuffs are
worn at all times in noisy environments.
• The noise attenuation of the product will be severely
impaired if you do not follow the instructions in this
operator's manual. Earmuffs, and in particular
cushions, may deteriorate with use and should be
examined at frequent intervals for cracking and
leakage, for example.
• Be more careful and listen for warning signals when
you use the product. The noise from warning signals
can be decreased when you use the product.
• Make sure that the product is not hit during
transportation and use.
3