Table of Contents
Advertisement
13. To confirm that the Adobe PostScript 3 ROM module is
installed correctly, print a status sheet. See "Printing a Status
Sheet" on page 267 for instructions. If PS3 is not listed as an
installed emulation on the status sheet, try reinstalling the
module. Make sure that it is securely seated into the ROM slot
on the circuit board.
Removing the Adobe PostScript 3 ROM module
Follow these steps to remove the Adobe PostScript 3 ROM
module:
Caution:
c
Before you remove the ROM module, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
Warning:
w
Be careful when working inside the printer as some components
are sharp and may cause injury.
1. Make sure the printer is off, then unplug the power cord.
2. Remove all interface cables from the interface connectors.
Installing Options
6
6
6
6
6
6
6
6
6
6
6
6
213
Advertisement
Table of Contents
