Terms; Generic Terms And Abbreviations - Mitsubishi Electric NZ2MF2S2-16A User Manual

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
Cyclic transmission
Link device
Master station
Reference response time
Reserved station
Slave station
SLMP

GENERIC TERMS AND ABBREVIATIONS

Unless otherwise specified, this manual uses the following generic terms and abbreviations.
Generic term/abbreviation
I/O combined module
I/O module
Input module
Output module
10
Description
A function by which data are periodically exchanged among stations on the same network using link
devices
A device (RX, RY, RWr, RWw) in a CPU module and a MELIPC that is used for communications with a
slave station
A station that controls the entire CC-Link IE Field Network Basic. Only one master station can be used in
a network.
A time period taken from when a slave station on CC-Link IE Field Network Basic receives a request from
the master station until it returns the response to the master station.
A station reserved for future use. This station is not actually connected, but counted as a connected
station.
A station that performs cyclic transmission with the master station on CC-Link IE Field Network Basic. The
station exchanges I/O signals (bit data) or I/O data (word data) with another station.
A SeamLess Message Protocol.
This protocol is used to access an SLMP-compatible device or a programmable controller connected to
an SLMP-compatible device from an external device.
Description
A generic term for CC-Link IE Field Network Basic remote I/O modules where a digital signal can be input
and output
A generic term for CC-Link IE Field Network Basic remote I/O modules
A generic term for CC-Link IE Field Network Basic remote I/O modules where a digital signal can be input
A generic term for CC-Link IE Field Network Basic remote I/O modules where a digital signal can be
output