Setting The Recording Quality - Ematic EM200VID User Manual

Setting the recording quality

Before starting the recording, you can set the recording quality.
1. Touch and hold [ ] to open the main menu.
2. Use [ ] or [ ] to select SETUP mode and touch [ ]. The SETUP menu appears.
3. Use [ ] or [ ] to select Record and touch [ ]. The record options appear.
•
Quality: To set the recording quality. The options include: Long Time, Normal Quality, High Quality.
•
VAD: Voice Activity Detection, which makes a voiced/voiceless decision to an input voice signal from
microphone; stops the recording when no sound detected; and restarts the recording upon receipt of
voiced input. Select the "On" to enable the function.
•
AGC: Automatic Gain Control, which automatically adjust the volume of voice recording. Select the "On"
to enable the function.
4. Use [ ] or [ ] to select Quality, VAD or AGC and touch [ ] to open its sub-menu.
5. Use [ ] or [ ] to select a recording quality, or enable the VAD or AGC, and touch [ ] to confirm.
Note: The higher the frequency means the higher the quality, however, the recordable time will be shorten.
25