Assembling Sc-J2S(B) J4Kt7K - Mitsubishi Electric MELSERVO-J2S Series Manual

３.３.６ Assembling SC-J2S(B) J4KT7K
(１) Mounting the Replacing Servo Amplifier on Renewal Kit
* You have no extra space between the servo amplifier
and Renewal Kit. To mount the servo amplifier, use
such a Phillips head screwdriver as shown below.
Approx. 200mm
１．As shown in the drawing below, mount the replacing servo amplifier on the amplifier base ①.
To mount the replacing servo amplifier, use the screws among the accessories in the package
(M5×12; 4 screws).
Note 1
When mounting the amplifier base
①, pay attention to the
direction of the amplifier base.
If you try to mount the servo
amplifier in an incorrect
direction, you cannot mount it
correctly. For the details, see
section 3.3.3, paragraph (8).
Phillips head screwdriver
Replacing servo amplifier
３-２７
3 － 27
①Amplifier base