Table of Contents
Advertisement
7 Troubleshooting Guide
7.1.
Wi-Fi Module (IC8901/Flash Top P.C.B.)
7.1.1.
How to Remove Wi-Fi Password Protection
To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, this unit pro-
tects the Wi-Fi function with a password.
It is unable to service with password locked condition. When accepting for repair, the unit has been set the Wi-Fi password by cus-
tomer, run the [Reset Wi-Fi Settings] for removing Wi-Fi password, then check the operation.
[Reset Procedure of Wi-Fi Settings]
1) Press the [ MODE ] button, and select the [ Normal Picture ] mode by Cursor buttons, then press the [ MENU/SET ] button.
2) Press the [ MENU/SET ] button, and select the [ SETUP ] mode by Cursor buttons, then press the [ MENU/SET ] button.
Select [ Reset Wi-Fi Settings ] by Cursor buttons, then press the [ MENU/SET ] button.
3) Select [ YES ] and press the [ MENU/SET ] button in several times.
(The [ Reset Wi-Fi Settings ] performs not only resetting Wi-Fi Password but also resetting other all Wi-Fi Settings.)
7.1.2.
Checking of trouble caused by Wi-Fi Module or not
*Change the Flash Top P.C.B., when the above checking detected the abnormal of Wi-Fi module.
21
Advertisement
Table of Contents
