Cisco SCE 2000 Quick Start Manual page 43

Chapter 4 Connect the Management Interfaces and Perform Initial System Configuration
Perform the Initial System Configuration
2- Not-Operational
Enter your choice [1]: 1
Data collection for the system configuration is completed.
All other parameter values are automatically assigned by the system.
EXAMPLE 2:
Following is a sample topology configuration for a non-redundant inline topology. In this topology, a
single SCE 2000 is connected to one or two GBE links.
When the inline connection mode is specified, the user must specify the on-failure link behavior.
Would you like to enter the Topology configuration menu? [no]: y
Enter Connection mode:
1- inline
2- receive-only
Enter your choice [1]: 1
Is this a cascade deployment? [no]: no
Enter On-failure behavior:
1- bypass
2- cutoff
Enter your choice [1]: 1
Enter admin status of the SCE after abnormal boot:
1- Operational
2- Not-Operational
Enter your choice [1]: 1
Data collection for the system configuration is completed.
EXAMPLE 3:
Following is a sample topology configuration for a secondary SCE 2000 in a redundant inline topology.
In this topology there are two SCE 2000s that are cascaded via the cascade GBE ports (ports 3 and 4).
Each SCE 2000 is connected inline to both sides (subscribers/network) of one GBE link.
In this case, the user must specify the physically-connected-link index (link-0 in our example), the
priority of the SCE 2000, and the on-failure link behavior.
Would you like to enter the Topology configuration menu? [no]: y
Enter Connection mode:
1- inline
2- receive-only
Enter your choice [1]: 1
Is this a cascade deployment ? [no]: yes
Enter Physically connected link:
0- link-0
1- link-1
Enter your choice [0]: 0
Enter SCE 2000 priority:
1- primary
2- secondary
Enter your choice [1]: 2
Enter On-failure behavior:
1- bypass
2- cutoff
Enter your choice [1]: 1
Enter admin status of the SCE after abnormal boot:
1- Operational
2- Not-Operational
Enter your choice [1]: 1
Data collection for the system configuration is completed.
Cisco SCE 2000 4xGBE Quick Start Guide
4-23
OL-7820-06