Bosch Worcester FW 100 Installation & User's Instructions page 25

Copying ready-made programmes
There are eight ready-made heating programmes
permanently stored on the heating controller.
They can not be directly applied to a heating cir-
cuit.
To be able to use the ready-made heating pro-
grammes, you must copy them to one of the loca-
tions for heating programmes (A to C), where you
can also adapt them if necessary
( Section 5.2.2).
You can also copy any of the pro-
grammes A to C to another storage
location as a template.
Select the storage location to which the pro-
gramme is to be copied (A to C):
B Open menu option Heating > Programme >
Edit > A:Programme A ... C:Programme C.
B Press the rotary selector
The function Copy from preset programme is
selected and the option No is flashing.
6
B Turn the rotary selector
of the display shows the heating programme
that is to be copied (e.g. Full weekday
worker).
B Press .
The heating programme has now been copied.
Resetting an entire programme (replacing with
default settings)
The unit is supplied with programmes for heating
and domestic hot water already stored in the
memory ( Section 13 on page 75).
Overwrite one of your own heating programmes,
A to C, as follows:
twice.
9 12 15
h
3 24 21
h
6 720 617 763-14.1O
until the last line
6 720 617 763 (2008/09)
B Open the programme concerned (e.g. menu
path: Heating > Programme > Edit > C:Pro-
gramme C or menu path: Domestic hot
water > DHW programme > Edit).
Turn the rotary selector
B
option Reset factory settings.
B Press
The programme has now been reset to the
default settings.
Resetting all settings (for installers only)
This function resets all settings on the MAIN
MENU and the INSTALLER SETTINGS to their
default settings. Following such a reset, your
heating installer will need to commission the
system again!
If the basic display is showing:
B Simultaneously press and hold
until the following warning message appears:
18
B Continue holding
lowing message appears:
B Press
All settings have now been reset to their
defaults with the exception of the date and
time, which remain unchanged.
to select the
.
menu
9 12
h
6
3 24
h
and
menu
9 12
h
6
3 24
h
.
Operation
and
15
18
21
6 720 617 763-15.1O
until the fol-
15
18
21
6 720 617 763-16.1O
25