Location And Function Of Parts And Controls - Sony SVRM-911 Operating Instructions Manual

Location and Function of Parts and Controls

1 POWER switch
2 LED display setting buttons
U ID SET
POWER
VIDEO AGC
ON
ON ON
OFF OFF
OFF
Front
7 Record/playback functions
setting switches
!¢ BATTERY switch
!£ DATE switch
Rear
1 POWER switch
Power is supplied to the unit when the ON side of the
switch is pressed.
2 LED display setting buttons
LED display is set using the buttons below.
Button Function
U ID SET (User Press this to set the User ID and the
ID setting) leftmost digit begins to blink.
SHIFT Press this to select the display which you
want to change. Each press shifts the
display which is blinking.
INC Press this to increase the blinking display
(Increment) by 1.
DEC Press this to decrease the blinking
(decrement) display by 1.
16
3 CLOCK SET button
CLOCK SET
SHIFT INC DEC
EJECT
ID REC Hi-Fi REC AUDIO NR LIMITER
STOP
ON ON ON
OFF OFF OFF
8 EJECT button
DATE BATTERY
M/D/Y ON
D/M/Y OFF
4 LED display
REC
CHANGER START
6 r
REW PLAY F FWD
"
p 0 0
9 Tape transport buttons
0 CHANGER START button
!¡ SEARCH buttons
!™ AUDIO OUT switch
REMOTE
!¶ y (Signal ground) terminal
!• ⁄ AC IN connector
3 CLOCK SET (date and time settings) button
Using a ball point pen, etc., press this to set the date
and time.
4 LED display
Displays the date/time and the User ID.
5 LED display switch
Switches the LED display as indicated below.
DATE/U ID: Displays the date/time and the User ID
(2 digits).
U ID: Displays the User ID (12 digits).
6 TEST buttons
Press these buttons simultaneously to perform an
automatic check with duplicators.
5 LED display switch
6 TEST buttons
DATE
/U ID
U ID
AUDIO OUT
TEST
Hi-Fi
NORMAL
SEARCH
PAUSE
REV FWD
!∞ REMOTE connectors
!§ Battery compartment
⁄ AC IN