Makita BCV02 Instruction Manual page 4

Remaining battery capacity indication (Fig. 4)
Press the remaining battery capacity display button to light the indicator lamps and indicate the remaining battery
capacities for approximately 10 seconds. The indicator lamps correspond to each battery.
NOTE:
• When only the lowermost indicator lamp blinks for either Battery 1 or Battery 2, this means that the battery capacity is
low, so the product does not operate. In these cases, charge the battery that is low, or replace it with a fully charged
battery. The product does not operate when either of the batteries has run out.
• The indicated charge may be slightly lower than the actual level during use or immediately after using the product.
How to read the remaining battery capacity indication
Indicator lamps (Battery 1 or Battery 2)
: On
• Depending on the conditions of use and the ambient temperature, the remaining capacity may not be indicated cor-
rectly.
Example of remaining charge indication (Battery 1: 80%, Battery 2: 10%)
Battery 1
4
: Off : Blinking
or
Battery 2
Remaining charge or indication contents
50% to 100%
20% to 50%
0% to 20%
Charge the battery