Airplay Service - ViewSonic CDE6520-W User Manual

7.3.

Airplay Service

Please ensure that DNS is enabled on the network/access point/wireless controller.
Network information
• Ports:
- TCP 51040, 51030, 51020 & 51010
- UDP 5353 (mDNS to broadcast Airplay)
• How to verify Airplay is broadcasting:
1. Ensure that your iOS device and ViewBoard® are connected to the same subnet network.
2. Open Control Center and touch Airplay Mirroring on an iOS device, e.g. iPhone/iPad.
3. You should see a device prefixed with "Cast-xxxx".
4. If "Cast-xxxx" is showing then this confirms that the vCastReceiver is broadcasting Airplay services.
5. Click on the broadcasted "Cast-xxxx" device to mirror your iOS device to ViewBoard®.
AirPlay
Note:
1. Connect to the same network (Local Area Network), select 5G mode for optimal casting
2. ViewBoard® Cast will stay up to date with the latest version of AirPlay for ongoing compatibility
A dual band wireless access point
(5G) is preferred
Connect to in-room wireless
access point via Ethernet Cable
24