Specifications And Requirements; Specifications - Yamaha F150A2 Owner's Manual

Specifications and requirements

EMU40501

Specifications

TIP:
"(SUS)" indicates that the specification is for
the outboard motor when it is equipped with
a stainless steel propeller.
EMU2821U
Dimension and weight:
Overall length:
821 mm (32.3 in)
Overall width:
513 mm (20.2 in)
Overall height L:
1714 mm (67.5 in)
Overall height X:
1842 mm (72.5 in)
Motor transom height L:
516 mm (20.3 in)
Motor transom height X:
643 mm (25.3 in)
Dry weight (SUS) L:
223 kg (492 lb)
Dry weight (SUS) X:
228 kg (503 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Rated power:
110.3 kW (150 HP)
Idle speed (in neutral):
650–750 r/min
Power unit:
Type:
4-stroke DOHC L4 16 valves
Total displacement:
2670 cm³ (162.9 c.i.)
Bore × stroke:
94.0 × 96.2 mm (3.70 × 3.79 in)
Ignition system:
TCI
14
Spark plug (NGK):
LFR5A-11
Spark plug gap:
1.0–1.1 mm (0.039–0.043 in)
Steering system:
Remote steering
Starting system:
Electric starter
Starting carburetion system:
Fuel injection
Valve clearance IN (cold engine):
0.17–0.24 mm (0.0067–0.0094 in)
Valve clearance EX (cold engine):
0.31–0.38 mm (0.0122–0.0150 in)
Cold cranking amps (CCA/SAE):
512–1150 A
Marine cranking amps (MCA/ABYC):
675–1370 A
Min. reserve capacity (RC/SAE):
124 minutes
Cold cranking amps (CCA/EN):
510–1080 A
Min. rated capacity (20HR/IEC):
80 Ah
Maximum generator output:
36 A
Lower unit:
Gear shift positions:
Forward-neutral-reverse
Gear ratio:
2.00(28/14)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F150A M/T
F150AET2 M/T
FL150AET2 ML/TL
LF150A ML/TL
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline