Download Print this page

Sony HKC-SV1 Installation Manual

Filter servo unit

Advertisement

Quick Links

FILTER SERVO UNIT
HKC-SV1
電気製品は、安全のための注意事項を守らないと、
火災や人身事故になることがあります。
HDC-X300
ご使用にあたっては、
ニュアルの「安全のために」 をよくお読みください。
本機をあやまって装着する と、火災・感電やその他の事故によ り 、 けがをし
たり周辺の物品に損害を与えたりする こ とがあ り ます。危険を避けるため、
装着はサービス ト レーニングを受けた技術者にご依頼く ださい。
本機を装着する技術者へ
装着のしかたは、 HKC-SV1イ ンス ト レーシ ョ ンマニュアルをご覧く ださ
い。
概要
フィルターサーボユニッ トHKC-SV1は、 HDマルチパーパスカメラ
HDC-X300シ リ ーズに装着して、 NDフ ィ ルターの切り換えを リモー ト コ ン
ト ールするためのオプシ ョ ンユニッ トです。
使いかたなど、 詳しく はHDC-X300シ リ ーズに付属のオペレーシ ョ ンマ
ニュアルをご覧く ださい。
仕様
動作温度
–10℃〜 +45℃
保存温度
–20℃〜 +60℃
最大外形寸法
58 ×38 × 55 mm (幅 / 高さ/ 奥行き)
重量
約 0.1 kg
付属品
イ ンス ト レーシ ョ ンガイ ド(1)
仕様および外観は、 改良のため予告なく 変更する こ とがあ り ますが、 ご
了承く ださい。
お使いになる前に、 必ず動作確認を行ってく ださい。 故障その他に
伴う営業上の機会損失等は保証期間中および保証期間経過後に
かかわらず、補償はいたしかねますのでご了承く ださい。
INSTALLATION GUIDE
HKC-SV1 (SY)
3-869-803-03(1)
シリーズに付属のオペレーションマ
[Japanese/English]
Sony Corporation
Precautions
If this unit is installed incorrectly, personal injury or damage
to peripheral items may occur due to fire, shock, or other
accidental circumstances. To avoid such risks, installation
should be performed by trained service technicians.
To technician installing the unit
For installation instructions, please refer to the HKC-SV1
installation manual.
Introduction
The HKC-SV1 Filter Servo Unit is an optional unit
designed to be mounted on an HDC-X300-series HD Multi
Purpose Camera to remotely control ND filter switching.
For details, refer to the Operation Manual of the HDC-
X300-series camera.
Specifications
Operating temperature –10°C to +45°C
Storage temperature
Dimensions
Mass
Supplied accessories
Design and specifications are subject to change without notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF THIS
UNIT, EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY, OR
FOR ANY OTHER REASON WHATSOEVER.
(+14°F to +113°F)
–20°C to +60°C
(–4°F to +140°F)
58 × 38 × 55 mm (w/h/d)
× 1
× 2
3
1
1
(2
/
/
/
inches)
8
2
4
Approx. 0.1 kg (4 oz)
Installation Guide (1)
Printed in Japan
2009.03 13
2005

Advertisement

loading

Summary of Contents for Sony HKC-SV1

  • Page 1 本機を装着する技術者へ 装着のしかたは、 HKC-SV1イ ンス ト レーシ ョ ンマニュアルをご覧く ださ Introduction い。 The HKC-SV1 Filter Servo Unit is an optional unit designed to be mounted on an HDC-X300-series HD Multi 概要 Purpose Camera to remotely control ND filter switching. For details, refer to the Operation Manual of the HDC- フィルターサーボユニッ...
  • Page 2 You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan, operate this equipment. Minato-ku, Tokyo, Japon. Le représentant autorisé pour EMC et la sécurité des produits This device complies with part 15 of the FCC Rules.