NETGEAR Nighthawk AD7200 User Manual page 14

Table 1. LED descriptions (Continued)
LED and Button
10G LED
Ethernet LEDs for ports 1–6
WiFi/On/Off button and
LED
WPS button and LED
Note: If the LED On/Off switch on the rear panel is moved to the Off position, all the
LEDs except the Power LED are turned off.
Hardware Setup
Nighthawk AD7200 Gaming Router Model XR700
Description
Solid white. A powered-on device is connected to the 10G LAN SFP+ port.
Blinking white. The port is sending or receiving traffic.
Off. No device is connected to the 10G LAN SFP+ port.
The LED color indicates the speed: white for Gigabit Ethernet connections and
amber for 100 Mbps or 10 Mbps Ethernet connections.
Solid white. The router detected a 1 Gbps link with a powered-on device.
Blinking white. The port is sending or receiving traffic at 1 Gbps.
Solid amber. The router detected a 100 Mbps or 10 Mbps link with a powered-on
device.
Blinking amber. The port is sending or receiving traffic at 100 Mbps or 10 Mbps.
Off. No device is connected to this Ethernet port.
Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios
on and off.
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned
off and you cannot use WiFi to connect to the router.
This button lets you use WPS to join the WiFi network without typing the WiFi
password. The WPS LED blinks white during this process and then lights solid
white.
14 User Manual