Sony Bravia KLV-46J400A Operating Instructions Manual page 27

Dual Sound
Screen menu
Press MENU and select "Settings". Press F/f to select the "Screen" icon (
• "Screen" menu is not available when receiving PC signal. When receiving PC signal, you can use "PC Settings"
menu to perform related settings (page 31).
Wide Mode
Auto Wide
4:3 Default
Display Area
Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
Broadcasting
NICAM stereo
NICAM bilingual
NICAM monaural
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select "Mono".
The sound becomes monaural, but the noise is reduced.
• Receiving condition of NICAM broadcast is subject to the area in China.
• The "Dual Sound" setting is memorized for each programme position.
• You cannot receive a stereo broadcast signal when "Mono" is selected for the
programme position.
• You cannot receive stereo or dual sound when "Low" or "High" is selected in
"Audio Filter" (page 33).
z • If you select other equipment connected to the TV, set "Dual Sound" to "Stereo",
"Main" or "Sub". However, when the external equipment connected to the HDMI
jack is selected, this is fixed to "Stereo", except HDMI IN 3 with DVI analogue
sound input.
For details about the wide mode, see page 13.
Automatically changes the wide mode according to the input signal from an external
equipment. To keep your setting, select "Off".
• "Auto Wide" is not available when watching TV programmes.
z • Even if "Auto Wide" is set to "On" or "Off", you can always modify the format of
the screen by pressing
Selects the default screen mode for use with 4:3 broadcasts.
"Wide Zoom": Displays conventional 4:3 broadcasts with an imitation wide screen
effect.
"Normal": Displays conventional 4:3 broadcasts in the correct proportions.
"Off": Keeps the current "Wide Mode" setting when the channel or input is
changed.
• "4:3 Default" is available only if "Auto Wide" is set to "On".
• "4:3 Default" is not available when watching TV programmes or for a HD input
signal.
Adjusts the screen area for displaying the picture.
"Full Pixel": Displays the picture for 1080/50i, 1080/60i, 1080/50p and 1080/60p
sources (HDMI or component input only) or 1080/24p sources (HDMI input only)
in the original size when parts of the picture are cut off.
"Normal": Displays the recommended picture area.
• "Display Area" is available only when "Wide Mode" is set to "Full".
Selection
Stereo (stereo sound)
Mono (regular sound)
Main (main sound)
Sub (sub sound)
Mono (regular sound)
Main (main sound)
Mono (regular sound)
), then press
repeatedly.
.
Continued
27
GB