Power Connection - Samsung NV70K1340BS User & Installation Manual

Accessories
The oven comes with different accessories that help you prepare different types of
food.
Wire rack
Universal tray *
NOTE
Availability of accessories with an asterisk (*) depends on the oven model.
NV70K1340BS_EE_DG68-00768A-01_SV+NO+FI+DA+EN.indb 7
Wire rack insert * Baking tray *
Extra-deep tray * Telescopic rail *

Power connection

Plug the oven into an electrical socket. If
a plug-type socket is not available due to
allowable current limitations, use a multi-
pole isolator switch (with at least 3 mm
L N
spacing in-between) in order to meet safety
regulations. Use a power cord of sufficient
01 02 03
length that supports the specification H05
RR-F or H05 VV-F, min. 1.5 ~ 2.5 mm².
01 BROWN or BLACK
02 BLUE or WHITE
03 YELLOW and GREEN
Rated current(A)
10 < A ≤ 16
16 < A ≤ 25
Check the output specifications on the label attached to the oven.
Open the rear cover of the oven using a screwdriver, and remove the screws on
the cord clamp. Then, connect the power lines to the relevant connection terminals.
The ( )-terminal is designed for earthgrounding. First connect the yellow
and green lines (earthgrounding), which must be longer than the others. If
you use a plug-type socket, the plug must remain accessible after the oven is
installed. Samsung is not responsible for accidents caused by missing or faulty
earthgrounding.
WARNING
Do not step on or twist the wires during installation, and keep them away from
heat-emitting parts of the oven.
Minimum cross-sectional area
1.5 mm 2
2.5 mm
2
English 7
2016-12-13 11:08:42