Table of Contents
Advertisement
Chapter 2 Preparations
9.
Depending on the components to be installed or removed, follow the procedure in order.
See Chapter 2 (1.10 Internal Flash Memory (N8115-07)) to (1.21
10.
11. Use of Internal hard disk drives in the RAID System).
12. Install the support bar.
See Chapter 2 (1.23 Installing Support Bar).
13. Install PCI riser card.
See Chapter 2 (1.24 Installing PCI Riser Card).
14. Attach Top Cover.
See Chapter 2 (1.25 Installing Top Cover).
15. Mount the server onto the rack.
See Chapter 2 (2.1.2 Installing the server to the rack or removing it from the rack (1) Installation).
16. Install hard disk drives.
See Chapter 2 (1.26 Hard Disk Drive).
17. Install power supply units
See Chapter 2 (1.27 Power Supply Unit).
18. Attach Front Bezel.
See Chapter 2 (1.28 Installing the Front Bezel).
This is the end of the installation or removal procedures for internal optional devices.
Continue the setup with reference to Chapter 2 (2.2 Connection).
50
Express5800/R120e-2M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
