Table of Contents
Advertisement
en Cleaning and servicing
Basic setting
Wi-Fi on/off
Software update
Network settings Reset the net-
energy mngmt.
16.2 Changing the basic set-
tings
To call up the basic settings for
1.
the sub-menu, press and hold both
buttons Basic settings 3 sec. for
approx. 3 seconds.
Select the required basic setting.
2.
→ "Overview of the basic settings",
Page 53
Adjust the basic setting.
3.
Press Basic settings 3 sec. to call
4.
up the main menu.
54
Description
Activate or deac-
tivate Wi-Fi.
→ "Activating Wi-
Fi on the appli-
ance", Page 52
→ "Deactivating
Wi-Fi on the ap-
pliance",
Page 52
Install the soft-
ware update.
→ Page 52
work settings.
→ Page 52
Connect the ap-
pliance to the en-
ergy manager.
Cleaning and servicing
17 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Tips on appliance care
Wipe down the
housing and the
control panel
with nothing but
water and a
damp cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Keep the appli-
ance door and
detergent drawer
open after use.
17.2 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the O³ Drum Clean
▶
gramme without laundry.
Add washing powder.
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
pro-
Advertisement
Table of Contents
