Technical Data - DeWalt XR LI-ION DCD996P2 Quick Start Manual

BRUSHLESS CORDLESS 13 mm DRILL/DRIVER,
DCD991
BRUSHLESS CORDLESS 13 mm DRILL/DRIVER/
HAMMERDRILL, DCD996
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No load speed
1st gear
2nd gear
3rd gear
Impact rate
1st gear
2nd gear
3rd gear
Max. torque (hard/soft)
hard
soft
Chuck capacity
Maximum drilling capcity
Wood
Metal
Masonry
Weight (without battery pack)
WALT one of the
e
DCD991 DCD996
V 18 18
DC
1/10 1/10
Li-Ion Li-Ion
W 820 820
Drill, Driver/Hammer
min -1 0–450 0–450/500
0–1300 0–1300/1500
0–2000 0–2000/2250
min -1 – 0–8600
– 0–25500
– 0–38250
Nm 95 95
Nm 66 66
mm 1.5–13 1.5–13
mm 55 55
15 15
– 13
kg 1.5 1.6
Noise values and vibration values (triax vector sum) according to EN60745:
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Drilling into metal
Vibration emission value a = m/s
h,D
Uncertainty K =
Impact drilling
Vibration emission value a = m/s
h,ID
Uncertainty K =
Screwdriving
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
English
DCD991 DCD996
dB(A) 75 97
dB(A) 86 108
dB(A) 3 3
2 <2.5 <2.5
m/s 2 1.5 1.5
2 – 15.0
m/s 2 – 3.9
m/s 2 <2.5 <2.5
m/s 2 1.5 1.5
3