Toshiba Remote Control - Toshiba TDP490 Manual

6.2 TOSHIBA Remote control

The TOSHIBA Remote control has two purposes:
1.
To access the Main Menu and control the various
image adjustments and utility functions of the
TOSHIBA TDP490
2.
To allow remote control of your computer
Pointing it towards the projection screen operates the
remote control. An infra red beam bounces from the
screen to an infrared receiver on the TOSHIBA
TDP490.
NOTE!
Make sure nothing is blocking the IR receiver in
front of projector located beside the lens, as this
will prevent the communication between the remote
control and the TOSHIBA TDP490.
To ensure smooth operation, the combined dis-
tance from the remote control to the screen and
back to the projector should not exceed 10 meters
(33 ft). If the distance via the screen is longer, you
should point the remote control directly towards
the IR receiver.
15
Figure 12: Toshiba remote control
The remote control works with Macintosh and with
Microsoft Windows, for interactive distance control of
your computer. A unique pressure-sensing pad on the
remote makes it very easy to control the computer and
to perform the exact same operations as you would
with a normal mouse.
Note!
When you finish your presentation, please close
your file and turn off your computer first by Toshiba
remote
Contents