Table of Contents
Advertisement
EN
User instructions
DOSE MONITORING
Silence Dose Alarm
FIT TEST
Perform Fit test
Fit test result: Good fit
Fit test result: Poor fit
CALIBRATION
Calibration in progress
Calibration Complete
MAINTENANCE
Factory reset
Recovery mode
PAIR WITH BLUETOOTH DEVICE
The headset is in Bluetooth pairing mode when powered on. Enable Bluetooth on your
mobile device and ensure that the mobile device is within 10m of the headset. Next time
the headset is turned ON, it will try to automatically pair with the last paired device.
BLUETOOTH CONNECTIVITY
First time pairing
Finding a headset
Confirm a connected
headset
(D) TECHNICAL INFORMATION
Over-the-head headband earmuff.
Material of headband: Steel, textile and polyurethane.
Material of ear cushion: PVC and polyurethane.
Weight:
xxx
g (without batteries).
Hygiene Kit and replacement parts: Contact your distributor or sales representative
PATENTS
Patents pending. For patent information, see http://www.honeywellaidc.com/patents
5
Press *C2
Double press
*C2
Open app and follow
onscreen instructions
Initiate from app
Press *C1 Once
*C3 flashes red and stops. Alarm stops
Repeated audio tone
Positive audio tone
Negative audio tone
*C3 Blinking Green
*C3 Solid Green
*C4 blinks blue and times out at 30s
*C4 solid blue + Audio tone
Advertisement
Table of Contents
