ViewSonic LD-STND-003 Quick Start Manual page 12

Installing System Control Box Covers
There are three (3) System Control Box Covers: Left, Middle, and Right.
RS232 USB USB USB OUT HDMI HDMI 2 HDMI 1 AUDIO OUT USB-B LAN
STAND-BY INPUT BRIGHTNESS
4. Begin by installing the Right Cover onto the System Control Box.
NOTE:
Ensure the Power Button cable is connected to the System Control Box Power
cable before securing the Cover.
5. After connecting the Power Button cable, ensure the Right Cover is properly aligned
with the System Control Box; then secure it with the 12 provided screws (KM3x6mm).
USB USB USB HDMI HDMI HDMI AUDIO USB-B LAN
OUT 2 1 OUT STAND-BY INPUT BRIGHTNESS
NOTE:
Screws (KM3x6mm) are placed in the accessory box of the LED Display.
12