Setting Man Down (Fall Alert); Security; Pin Protect; Protecting The Radio With A Pin Code - Motorola MTP6650 Feature User Manual

For easier localization of the radio, visual and audible indications are started until they are deactivated.
If the Emergency Hot Microphone is on, the additional audio indication is not played.
To exit Man Down (Fall Alert), exit the Emergency Mode by pressing and holding the Exit Soft key, or
press the PTT button.
4.8.1

Setting Man Down (Fall Alert)

Procedure:
1 From the home screen, press the Menu key.
2 Select Man Down (henceforth known as Fall Alert).
3 Select one of the following options:
• On – Activates the feature.
• Off – Deactivates the feature.
4.9

Security

Security menu stores all your security settings.
4.9.1

PIN Protect

This feature allows you to enable/disable PIN code authentication at the next power on. This code
protects your radio against unauthorized use.
NOTE: Customers are strongly advised to change the default PIN code in order to protect
devices from unauthorized access.
If you are unable to unlock the radio, you can only send or receive Emergency Calls and adjust the
volume level with the Rotary Knob.
NOTE: If the radio uses a BSI PIN code and you are unable to unlock the radio, you cannot
take any action.
4.9.1.1

Protecting the Radio with a PIN Code

Procedure:
1 From the home screen, press the Menu key.
2 Select Security→PIN Protect.
3 Select On.
4 Enter the PIN code.
NOTE: To increase security, set your own PIN code. By default the PIN code
are all zeros (depending on the length of the PIN code). For radios with general
PIN authentication, the PIN length is a fixed 4-digit code. For radios with BSI PIN
authentication, the PIN length is configurable by your service provider up to a maximum
of 8-digit code.
Postrequisites:Each time you turn on the terminal, PIN code is required.
MN005826A01-AE
Chapter 4 : Main Menu
97