Preparations Before Adjustment (Camera Section); List Of Service Tools - Sony Digital Handycam DCR-TRV120 Service Manual

5-1. CAMERA SECTION ADJUSTMENT
1-1.

PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)

1-1-1. List of Service Tools

• Oscilloscope
• Regulated power supply
Ref. No.
J-1 Filter for color temperature correction (C14)
ND filter 1.0
J-2 ND filter 0.4
ND filter 0.1
J-3 Pattern box PTB-450
J-4 Color chart for pattern box
Adjustment remote commander (RM-95 upgraded).
J-5
(Note 1)
J-6 Siemens star chart
J-7 Clear chart for pattern box
J-8 Multi CPC jig
J-9 CPC-13 jig
J-10 Power cord (Note 2)
J-11 Extension cable (16P, 0.5 mm)
J-12 IR receiver jig
J-13 Mini pattern box
J-14 Camera table
Note 1: If the micro processor IC in the adjustment remote
commander is not the new micro processor (UPD7503G-
C56-12), the pages cannot be switched. In this case, replace
with the new micro processor (8-759-148-35).
J-1 J-2
J-6 J-7
J-11 J-12
• Color monitor
• Digital voltmeter
Name
J-3
J-8
J-13
• Vectorscope
• Frequency counter
Parts Code
Auto white balance adjustment/check
J-6080-058-A
White balance adjustment/check
J-6080-808-A White balance check
J-6080-806-A White balance check
J-6080-807-A White balance check
J-6020-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A For checking the flange back
J-6080-621-A
J-6082-311-A For adjusting the LCD block
J-6082-443-A For adjusting the video section
J-6082-223-A For connecting the battery terminal and DC power supply
For extension between the CD-242 board (CN101) and
the VC-235 board (CN1501)(720H model)
J-6082-357-A
For extension between the CD-244/269 board (CN151) and
the VC-235 board (CN1501)(960H model)
J-6082-383-A For adjusting the IR transmitter
J-6082-353-B For adjusting the flange back
J-6082-384-A For adjusting the flange back
Note 2: Connect the adjustment remote commander to the LANC
jack, and set to HOLD switch to the "ADJ" side.
Note 3: 720H model: DCR-TRV120/TRV120P
960H model: DCR-TRV120E/TRV125E/TR8000E/
TR8100E
J-4
J-9
J-14
Fig. 5-1-1
5-4
Usage
J-5
J-10