Table of Contents
Advertisement
Mainboard jumpers
No.
Jumper
1
JWD1
Enable/Disable/Reset
Watch Dog
2
JBT1
Clear CMOS
3
JPG1
Enable/Disable VGA
4
JPL1/
Enable/Disable LAN1/2 Pins 1-2 (Enabled)
JPL2
NOTE: Jumpers not indicated are for test purposes only.
24
Description
Pins 1-2 (Reset)
Instead of pins, this jumper consists of contact
pads to prevent accidental clearing of the CMOS
contents. To clear CMOS, disconnect the power
and short the CMOS pads with a metal object
such as a small screwdriver.
Pins 1-2 (Enabled)
Default Setting
Chapter 5
Advertisement
Table of Contents
